Nissan Truck Clutch Parts Pressure Plate 30210-Z5072

OEM Truck Clutch Parts Fo Plate Clutch Parts Nissan Truck Clutch Pressure Plate 30210-Z5072

Your average clutch kit is composed of just a few major components: a pressure plate that provides clamping force, a disc that provides a friction surface, and a release bearing which provides a method of engagement and disengagement. All clutches are just a variation of that simple group of parts. Sure, you may have a kit with two or three discs, but it's all based around that same general idea.

The manipulation and combination of each component is what gives a clutch its own unique personality. You can get to the same end result by taking several different routes, and that end result is the sole fact that you need enough clutch to fully transmit (when you so desire) the power that your engine is making to the transmission. Since the clutch's ability to do this is derived from clamping force and friction, then one of those routes is a large amount of clamping force (static pressure) combined with a soft friction material, and the other route is a lower amount of static pressure combined with a disc that has a very high coefficient of friction. There are also routes in between those two and they all give different performance characteristics and driving manners.

1. Product Description.

2. Detailed Product Pictures

3.Product Advantages

- Long-lasting Performance

- Lower Failure Rate

- Strong Durability

Since we're all Blue Oval fans here, we're basically looking at two different styles of pressure plates: the long-style (three-finger) and the diaphragm-style (multiple fingers). The long-style pressure plates are most commonly available in 10.5-, 11-, and 11.5-/12-inch diameters. They are the preferred pressure plates for competition because of their use of both static and centrifugal pressure to clamp the disc. Clamping forces range from less than 1,000 pounds to more than 3,000 depending on the application. You will find these in most older vehicles, with the 10.5- and 11-inch plates being used on the small-blocks and some FEs. The 11.5-/12-inch pressure plates were generally reserved for big-blocks and some truck applications.

4. FAQs

Q: Which shipping term you can supply?

A:By sea, air or by express ( DHL, Fedex, TNT, UPS, EMS)

Q: If I am not satisfied with the products, can I returns goods?

A:Yes, we offer exchange and repair service under warranty. Please contact us before you return.

Q: What is your service process?

A:Please use the contact form down below to send us inquiry. We will get back to you in the next 8 hours and confirm the parts you need and quote you prices.