Active Member
|
[China]
Address: Add:Building B,Fuda industrial zone,107 national highway,Shajing,Baoan,Shenzhen,China
Contact name:Nicole
Shenzhen Jaguar Automation Equipment Co.,Ltd. |
|
|
2017 inline selective wave soldering machine for USB solder
Introduce:
1.More and more competition in the electronics market, to the
electronic product manufacturing enterprises bring huge quality and
cost pressures.Electronic products production process of high
density, miniaturization trend driving the rapid development of SMT
technology, the traditional wave soldering process have been unable
to meet the needs of the few remaining perforation components of
welding, and manual mode is difficult to for large heat capacity or
fine pitch components to realize high quality, high efficiency
welding, the machinery, equipment and labor cost advantage is
gradually lost.Mini selective wave soldering technology to the
development of electronic product manufacturing engineers provide a
new choice, at the same time, choose welding low running cost and
high applicability to quickly get the welcome of electronic
products manufacturers.
2.Selective wave soldering system is a kind of controlled by the
program, the installation will help flux nozzle and tin furnace of
multi-axis control platform.PCB online via rail transportation
after positioning, will first spray flux accurately on the PCB for
welding on site, and then through a small nozzle (usually 2 ~ 4 mm)
in diameter and solder pump to create an accurate circular mini
solder wave, after multi-axis control platform, from the bottom of
the PCB welding.Due to welding components usually surrounded by SMT
components, and high density, small spacing, in order to avoid
damage to the bottom of the adjacent components and welding plate,
selecting welding process must be very precise.
| The machine model | SEL400 |
| The machine's overall | |
| The machine size | L2710 x W1650 x H1635mm |
| The machine total power | 11kw |
| The machine operating power | 3--6kw |
| The power supply | Single phase 220V |
| The net weight | 1300KG |
| Air source pressure requirements | 3-5 Bars |
| Air source flow requirements | 8-12L/min |
| Nitrogen source pressure requirements | 3-4 Bars |
| Nitrogen source flow requirements | Greater than 2 cubic/hour |
| Source nitrogen purity requirement | 99.998% |
| Pumping air volume requirements | Spray above:800---1000cbm/h On top of the stove:600---800cbm/h |
| Fixture with PCB | |
| fixture | choose according to need |
| The biggest size | L400 X W400MM Note: W width for the machines |
| The largest welding area | L400 X W400MM Note: W width for the machines |
| PCB board edge | More than 3 mm |
| Control and transportation | |
| Control system | Industrial PC + controller |
| Transport width | 100-400MM |
| The mode of transportation | Spray and preheating section chain guide rail transportation, solder on the roller type |
| Thickness of transportation | 1----4mm |
| PCBTransport direction | Horizontal transport from left to right |
| PCBBoard is clear | 50MM |
| PCBUnder the plate clearance | 30MM |
| Transport bearing | Less than 5kg |
| Transport guide | Aluminum rail |
Transport height | 900+/-30mm |
packing
