Steel Flying Shearing Machine For TMT Rebar Production Line

Steel Flying and Shearing Machine for TMT Rebar Production Line

Due to the characteristics of flying shear machine can be transverse shear rolling pieces.The fixed length flying shears should ensure good shearing quality, that is, the fixed length is accurate, the cutting surface is neat, and the fixed length adjustment range is wide, at the same time, the fixed length flying shears should have a certain shear speed.Therefore, the structure and performance of flying shears must meet the following basic requirements in the shear process:

1. The quality of the shear section of the rolling piece which can be moved by shearing shall conform to the relevant provisions of the national standards.The flying shear machine is required to have a reasonable shear mechanism.

2. Cut the rolling piece into the specified length, and can cut a variety of fixed length in the same flying shear machine, dimensional tolerance in line with the provisions of the national standard (for cutting head flying shear requirements can be accurately cut in the specified parts).This requires that the flying shear machine has an accurate length adjustment mechanism.

3. Meet the requirements of mill or unit productivity.

4. The speed of flying shears must match the speed of rolled parts to ensure the quality of rolled parts and prevent equipment accidents.

Performance characteristics:

Large shear section, large shear force

High shearing accuracy

Optimized box stability, good running stability

Long rod flying shear machine is used in the continuous rod and wire rolling production line for rolling pieces of cutting equipment, in the process of rolling pieces in the actual rolling pieces of cutting head, cutting tail, accident broken and finished product times the length of the shear.We according to different GaXian on different functional requirements to provide different types of flying shear design, such as the crank connecting rod type flying shear machine, rotary flying shear and crank connecting rod + rotary combined type flying shear, different structure in different conditions with different shear rate and shear force, and on the GaXian electromechanical integration control system under the control of frequent rev, braking,Shearing is achieved at large inertia.

This shear is used to cut different sized metal tube and pipe materials.

Specification:

1. With hydraulic drive, convenient operation, simple maintenance.

2. Machine and oil tank are in set without installation.

3. High pressure cutting without breakout.

1. Lower investment

2. Steady performance

3. Products are customized for different demands

4. Product capacity can be adjusted according to customer's request

5. Low energy consumption

Packaging Details: Wooden case packing or nude packing

Port: Tianjin

Lead Time: