|
[China]
Trade Verify
Address: Room1905, No.251, Huipu Financial Building, Tongyang South Road, Liangxi District, Wuxi City, Jiangsu Province, China
Contact name:Huang
Wuxi Yushun Metallurgical Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
High Efficiency and High Precision Short Stress Rolling Mill for
Rod/Rebar Production line
The mill is an integral cast steel "zero crown" stand.The rolling mill body includes rolling mill gate, roll, each supporting combination, press roll and rolling oil injection.
Rolling mill arch structure: the whole frame made of cast steel is equipped with two upper and lower rollers and supporting bearings (3 pieces are in a group of 8 groups). The control of pressing and rolling line is carried out by an eccentric mechanism installed in the bearing pedestals of BC and FG support rolls.The work roller bear the love of the force respectively through themiddle roller transmission to the 8 supporting roller bearing pedestal, finally by the strong frame.The club hole fixed on the 8 supporting roller bearings has high precision (the parallelism is controlled within 0.01/1000mm) to ensure the high precision of rolled products. The rolling mill can roll high precision and high quality strip steel, because of its high rigidity and has a middle roller transverse adjustment device and roller crown adjustment device.
| Description of rolling parameters | |
| Steel grade | AISI300,AISI400 series stainless steel |
| Strip width | 350-500mm |
| Maximum coil weight | 6 tons (excluding sleeve) |
| Coil diameter | 508mm (inside diameter), 1500 mm (maximum outside diameter), 800 mm (minimum outside diameter) |
| Thickness of the material | Less1.5mm |
| Thickness of the finished product | Guarantee value 0.05mm Target value 0.03mm |
| Roll parameters | |
| working roll | 9Cr2MoV |
| Roll diameter | Φ36-44mm |
| Hard degree | 60-62HRC |
| Roughness | One roll RA0.8, Secondary rolling RA0.3 -0.4 |
| Grinding depth | 0.05mm |
| Grinding cycle | One roll when grinding is required (approximately per coil of
steel) Second rolling each coil of steel or roll mark, crack when grinding |
| One Intermediate roll | |
| Diameter | Φ70-77mm |
| Hardness | 56-58HRC |
| Roughness | Ra1 0.3～0.4 |
| Grinding depth | 0.4mm |
| Second intermediate roll | |
| Diameter | Φ126-130mm |
| Hardness | 58-60HRC |
| Roughness | Ra1 0.3～0.4 |
| Grinding depth | 0.5mm |
Selling Units: Single item
Single package size: 150*100*170cm
Single gross weight: 100,000kg
Package Type: Safety Seaworthy Package
Lead Time:
| Quantity (Tons) | 1-100 | >100 |
| Est. Time(Days) | 60 | To be negotiated |
