Active Member
|
[China]
Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046
Contact name:Raymond Chung
Dongguan Quality Control Technology Co., Ltd. |
|
|
LCD Controller Charpy Impact Material Testing Machine with Built-in Printer for Plastics
Product introduction:
iqualitrol digital display Charpy impact tester is mainly used for
the determination of the impact toughness of non-metallic materials
such as hard plastics, reinforced nylon, glass steel, ceramics,
cast stone, and electrical insulating materials.
It is an ideal test equipment for the chemical industry, research institutes, universities, and quality inspection departments.
The implementation of standards:
1, ISO 179-1: 2010 Plastics — Determination of Charpy impact properties, specifies a method for determining the Charpy impact strength of plastics under defined conditions
2, GB/T1043 Plastics Determination of charpy impact strength of rigid materials
3, JB/T8762 Charpy impact testing machines for plastics
4, GB/T 18743-2002 Thermoplastics pipes for the transport of fluids - Determination of impact by the Charpy method
Highlighted Features:
1, High-precision intelligent controller with LCD display,
intuitive and accurate reading data, use of carbon fiber pendulum
(patent pending), improving the rigidity of the material in the
impact direction, and focusing the impact mass on the pendulum.
2, The hammer's center of mass is truly shock-free and has a long service life. high-resolution digital encoder, angle test accuracy is higher and more stable.
3, Impact hammers and ball bearings that meet the aerodynamic principle, greatly reduce the friction loss caused by the machine and automatically calculate the final result.
4, The test data can be saved 12 sets, test results can choose J/m, KJ/m2, kg-cm/cm, ft-ib/in and other units built-in micro printer to print test data.
Technical specifications:
| Display mode | Color touch screen (Chinese and English) | ||
| Angle Sensor | Accuracy 0.01 | ||
| Energy display accuracy | 0.01J | ||
| Impact speed | 2.9m/s or 3.8M/S | ||
| Distance | from pendulum center to sample center: 230mm, 395mm | ||
| Pendulum lifting angle | 150° | ||
| Jaw support spacing | 40mm, 60mm, 70mm, 95mm | ||
| Support blade corner radius | R=1mm | ||
| Impact blade angle | 30° | ||
| Impact blade fillet radius | R=2mm±0.5mm | ||
| Model | JZL-5D | JZL-15D | JZL-50D |
| Pendulum Energy | 1J , 2J, 4J, 5J | 7.5J, 15J | 25J, 50J |
