Home Companies Dongguan Quality Control Technology Co., Ltd.

OLED Screen Echo-Echo Mode Non Destructive Ultrasonic Thickness Gauge with Color Waveform

Dongguan Quality Control Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046

Contact name:Raymond Chung

Inquir Now

Dongguan Quality Control Technology Co., Ltd.

OLED Screen Echo-Echo Mode Non Destructive Ultrasonic Thickness Gauge with Color Waveform

Country/Region china
City & Province dongguan guangdong
Categories Sandals & Clogs
InquireNow

Product Details

 

OLED Screen Echo-Echo Mode Non Destructive Ultrasonic Thickness Gauge with Color Waveform

 

Features:

1, Color OLED 320x240 Pixels Display;

2, Live Simultaneous Color A-Scan and Thickness Display;

3, Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes;

4, Time-based B-Scan Display;

5, Echo-Echo Mode(Through Paint & Coatings);

6, Stores 100,000 Readings and 1000 waveform;

 

Technical Specifications:

Display Type2.4” color OLED, 320×240 pixels, contrast 10,000:1
Operating PrinciplePulse echo with dual element transducers
Measuring Range0.50mm to 508mm(0.02” to 20.00”), depending on material, probe and surface condition
ResolutionSelectable 0.01mm, 0.1mm(selectable 0.001”, 0.01”)
UnitsInch or Millimeter
Rectify ModeRF+, RF-, HALF+, HALF-, FULL
Display ModeNormal, Minimum/Maximum capture, DIFF/RR%, A-Scan, B-Scan
V-Path CorrectionAutomatic
Update RateSelectable 4Hz, 8Hz, 16Hz
Material Velocity Range500 to 9999m/s(0.0197 to 0.3939 in/microsecond)
LanguagesEnglish, French, German, etc.
Alarm SettingsMinimum and Maximum alarms. Range of 0.25mm to 508 mm(0.010” to 20.00”). Dynamic waveform color change on aalarm
Power Requirements2 AA size batteries
Operating TimeApproximately 40 hours
Instrument Shut-offSelectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
Operating Temperature-10℃ to +50℃(+10°F to +12°F )
Size153mm × 76mm × 37mm (H × W × D)
Weight280g including batteries

 

Live Color A-Scan

Users could directly see the color waveform of the ultrasonic sound (or A-scan) on the screen, which is quite important for the occasions that we need to check the correctness of the testing results. Many cases will cause wrong testing results or even noreadings. We could find the causes easily through the A-scan. Adjust the three parameters of GAIN, BLACKING, GATE, and then we will get the right readings.

 

Live Color B-Scan

UM-5 series thickness gauge has time base B-scan function. Move the probe along the workpiece surface, then the cross -sectional profile of the workpiece display, use for observe the underside contour of the workpiece.It could be automatically capture a minimum value of the B-scan image, and indicate the position of the minimum by a red triangle. You can see any point thickness value of the B-scan image by moving the pointer.

 

Recitification Modes

RF+, RF-, Half+, Half-, and FULL total 5 modes selective

RF+: describe the whole echo waveform

RF-: Invert display the radio frequency signal

Half+: Show the Half -Wave positive without the Half- Wave negative

Half-: Show the Half-Wave negative without the Half-Wave positive

FULL: Show both the Half-Wave Positive and upturned Half-Wave Negative

 

Larger and More convenient storage capacity

It can save one hundred thousand thickness values and one thousand A/B-scan waveforms,waveform and thickness values can be mixed stored in the same file.Storage capacity is 20-200 times to the similar products.
Use grid format storing files,the screen can display 15 thickness values and show its position in the grid,which is more convenient for the users to browse the stored data of the thickness.
USB 2.0 full speed connector, powerful DataView data statistics and management software.

 

 

 

The Difference Between UM-5 Series Technical Specifications:

FeatureUM-5UM-5DUM-5DL
Color Display

Live A-Scan

Time-based B-Scan

Control of Gain and Gate

Blanking

Through-paint&coatings

×

Data Logger

×

×

DataView Software

×

×

 

Standard Configuration:

 

NameQuantity
Main Unit1
Probe1
Battery2
Couplant1
Carrying Case1
Operating Manual1
USB Cable1(Only UM-5DL)
Software1(Only UM-5DL)

Note: Without Battery and Coupant if By Air Transportation.

 

 

Hot Products

Forced Air Precision Drying Oven with Volume 216L Forced air oven is designed to meet both ...
Environment Test Chamber for Sand Dust Resistance Conform IEC60529 IP5X IP6X Brief Introduction: ...
Programmable Temperature Humidity Alternative Climatic Test Chamber Cold Balanced Control Brief ...
Alternative Temperature Humidity Environmental Climatic Test Chamber by Cold Balanced Control ...
Cold Balanced Control Temperature Humidity Alternative Environmental Test Chamber Brief Introduction...
Programmable Humidity Temperature Alternative Test Chamber Controlled by Microprocessor Brief ...