Active Member
|
[China]
Address: Room 301, Building No.1, No. 2 Jiaolian Yiheng Rd, Wanjiang District, Dongguan, China, 523046
Contact name:Raymond Chung
Dongguan Quality Control Technology Co., Ltd. |
|
|
Max Test Force 1580Kgf Portable Pin Brinell Hardness Tester with 20X Reading Microscope
Technical Data Download: iqualitrol Brinell Hardness Tester PHB-1
Model: PHB-1
The PHB-1 Pin Impact hardness tester is designed following the
Brinell hardness test method. The test force is controlled by a
shear pin. After reading the diameter of the indention with the
reading microscope, the Brinell hardness value can be obtained from
the look up table.
This kind of hammer impact Brinell hardness tester is capable of
testing from small to very large specimens. It is especially
suitable for assemblies inconvenient to be taken to the lab and not
allowed to be cut. The test can be completed in any direction to
test the hardness of upper, lower and lateral part of the specimen.
Application:
The PHB-1 Pin Impact hardness tester can be widely used to test the
hardness of forgings, castings, steels, nonferrous metal and its
alloy products, and to test the hardness of annealed, normalizing
and tempered mechanical parts.
Compared to the rebound type hardness tester, the Brinell hammer
hit tester has many advantages such as higher precision, fewer
factors affecting accuracy and lower requirement on the surface
roughness. The test result meets the requirements of most drawings
without conversion and is more widely accepted in the international
business.
Test Method: This Brinell hardness machine applies Brinell hardness test method
Force Value Consistency: Good force value consistency, no influence by operator.
High Accuracy: Good repeatability and high accuracy. The accuracy is the same as desk tester. It could replace Leeb hardness tester in low accuracy and reliability.
Simple Operation: Simple and flexible operation.Only consume 1 piece of cheap shear pin for each test.
Technical data:
| Model | PHB-150 | PHB-1 | |
| Test Force | 1580kg | ||
| Tolerance of Test Force | < 0.5% | ||
| Indenter | Φ7.26mm steel spherical suface indenter, (test range: 100-400HB);Φ4.0mm carbide spherical surface indenter, (test range: 400-650HB) | ||
| Testing Range | 100-650HB | ||
| Application | Casting, forging and steel raw materials etc | ||
| Accuracy | Meets the requirements of ISO6506 ; Error of static type: <±3%HB ; Error of hammer impact type:<±5%HB | ||
| Package Dimensions | 705×375×205mm | 510×375×177 mm | |
| Gross/Net Weight | 11.6Kg/4.2kg | 3.8Kg/0.8kg | |
| Standard Delivery: | |||
| Φ7.26mm Steel Indenter | Flat-Anvil(PHB-150) | Accessories Box | |
| 20x Measuring Microscope | V-shape Anvil(PHB-150) | 2 rubber Protective Caps | |
| Brinell Test Block | Indenter Head Holder | Support Handle | |
| Test Head | Shear Pins (250 pcs) | Pin Removal Tool | |
