|
[China]
Trade Verify
Address: Room 401, Building H, Jingye 3rd Street, Yushu Industrial Park, Economic And Technological Development Zone, Guangzhou 510663
Contact name:Andea Electronics
Guangzhou Andea Electronics Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
RFID High-Precision Reader Installed On The Robotic Arm To Identify The Grasped Material,modbus RS232/485 interface
The use of an RFID reader on a robotic arm to identify the grasped material has various advantages. When the robotic arm picks up a material, an RFID tag attached to the material can be read by an RFID reader mounted on the arm. This enables the robotic arm to identify the material instantly and take appropriate actions based on the identified material, such as sorting, placing, or processing.
Furthermore, an RFID reader on a robotic arm allows for a higher level of automation. With the ability to identify the material being handled, the robotic arm can perform tasks without human intervention, making the process more efficient. It enables real-time tracking of the material as it moves through the manufacturing process, giving better insight into the production line.
Moreover, an RFID reader on a robotic arm can help to increase safety. It can prevent the robotic arm from handling materials that are not compatible with its intended use. For example, if the robotic arm is programmed to pick up a particular material, an RFID reader can identify if the wrong material is present, alert the system, and prevent the robotic arm from handling it.
Overall, the use of an RFID reader on a robotic arm to identify the grasped material can increase efficiency, increase safety, and provide valuable data insights into the manufacturing process.
| Specification | |
| Support Standard | ISO 15693,ISO 14443 TypeA/B |
| Operating Frequency | 13.56MHz |
| Reading Range | 0-40mm |
| Communication mode | M: Modbus RTU485 R:Modbus RS232 |
| Communication rate | 10/100M bps |
| Power Supply | 24V DC(9-30V) |
| Current | <0.07A@24V DC |
| Physical parameters | |
| Dimension | φ30mm*76.5mm |
| Weight | 85g |
| Fixed type | use two nuts to clamp on the site,or fixed in place by twisting |
| Housing Material | Brass nickel plating |
| Color | Sliver |
| Indicator light | LED*2 |
| Interface | M12A(4pin M) |
| Application environment | |
| Working Temperature | -40℃～+85℃ |
| Humidity | 5%～95%RH |
| Waterproof/dustproof | IP67 |
Application:
Engine Assembly Line
The reader can interface with various PLCs such as Siemens,Schneider and Mitsubishi through the industrial bus controller. By reading the RFID tag mounted on the tray,passing the information to the PLC, Through the information of installation to guide the assembly robot or the assembler to auto select the appropriate part,the engine assembly efficiency can be greatly improved.
Intelligent Application of Home Appliance Manufacturing Process
Through RFID data acquisition technology (By adding RFID tags on the product/tooling board and deploying RFID readers on the workstation),the unmanned,automatic and real-time identification of single-item products on the production line is realized.
Using real-time collected product information,complete error prevention of mixed flow production materials,real-time push of process guidance,automatic diversion of defective products,automatic generation of quality reports,product traceability management,mixed flow line alarms,and equipment automation docking.
Power Battery Assembly
Install the reader at the RFID collection point, and the on-line station collection point reads the RFID tag in the material box to obtain the information of slots in the material box (each slot is equipped with a cell with different voltage), The voltage value/grade of the test cell is written into the material box RFID tag at the test station of the voltage cell. When the cell is classified, read the RFID tag information of the material box and connect the robot in real time to automaticaly put the cell into the corresponding cell transport track. After the robot takes down the cell with different gear from the transport track and puts them into the same material box it will write the cell gear information into the RFID tag of the material box. Through the operation of each station on the RFID tag, a series of processes such as cell division, transportation, encapsulation, and assembly are completed in the process of cell assembly.
Dimension Drawing(mm):
Installation Instruction:
The product comes with M30*45mm thread. When fixing, use two nuts to clamp on the site,or fixed in place by twisting. If the application environment is not allow, we can support bracket to install.
When there are more than two readers to be installed, the distance between the readers needs to be greater than 850mm.
FAQ
1. What’s your Payment?
PayPal or T/T (Bank transfer) or Western Union and Ali trade Assurance are accepted.
2. What's your MOQ?
Big Order or Sample Order is accepted by our company.
We understanding new customers may take sample testing to know our quality and service.
3. What is the warranty?
3 years warranty for core device from the date of delivery,A lifetime technical support.
We will return full money to customer if we did not shipping right items as contract.
4. What’s your delivery time?
Around 2~10 working days according to exact order quantity and stock situation.
5. Why choose us?
With us make Win-Win Business Situation!!!
24 *7 hours after sales service
We accept "PayPal", credit card to convenient customer make payment.
Quality Assurance Contract
Full refund in case of bad quality
Online supports if any technique issue.
Both Small Order and Big Order are accepted.
Accept OEM/ODM order.
