|
[China]
Trade Verify
Address: 1F,Raching Bld, No.3 Seoul Rd,
Contact name:Yu.Jing
QINGDAO THUNDSEA MARINE TECHNOLOGY CO.,LTD |
|
Verified Suppliers
|
|
|
Model F70M-M-C High Accury Single-axis Fiber Optic Gyroscope With 0.25 °/hr Bias Drift
1. Working Principle and Function
This product is an inertial angular rate sensor based on the principle of Sagnac effect, which is used to measure the angular rate movement of the carrier around the sensitive axis of this sensor. This unit takes the fiber optic coil as the angular rate sensitive unit and the closed-loop detection circuit as the basis.
Two beams from a laser are injected into the same fibre but in opposite directions. Due to the Sagnac effect, the beam travelling against the rotation experiences a slightly shorter path delay than the other beam. The resulting differential phase shift is measured through interferometry, thus translating one component of the angular velocity into a shift of the interference pattern which is measured photometrically.
Beam splitting optics launches light from a laser diode into two waves propagating in the clockwise and anticlockwise directions through a coil consisting of many turns of optical fibre. The strength of the Sagnac effect is dependent on the effective area of the closed optical path: this is not simply the geometric area of the loop but is enhanced by the number of turns in the coil.
This product is an inertial sensor composed of optical system, corresponding power supply and data processing circuit. It can provide three-axis angle increment information.
2. Main Performance and Technical Parameters
2.1 Main Performance
| Index name | Index requirements | Remarks |
| Range of measured angular rate (°/s) | ±400 | |
| Scale Factor Non-linearity at fixed temperature (ppm) | ≤100 | |
| Asymmetry of Scaling Factor at Room Temperature (ppm) | ≤100 | |
| Scale Factor Repeatability at fixed temperature (ppm) | ≤0.25 | |
Scale Factor Repeatability at (ppm) | ≤0.25 | |
| Bias Drift at fixed temperature (10s,1σ,°/h) | ≤0.25 | |
| Bias Drift Repeatability at fixed temperature (1σ,°/h) | ≤0.03 | |
| Bias Drift Repeatability at full temperature range from －40℃till 60℃ (1σ,°/h) | ≤0.05 | Fixed-point constant temperature test |
| Bias Drift at full temperature range from －40℃ till 60℃ (100s,1σ,°/h) | ≤0.25 | Off line compensation |
| Random Wail (°/√h) | ≤0.003 | |
| Warm up time (min) | ＜5 | |
| Random vibration (°/h) | ≤0.1 | The difference between the mean of zero deviation before and after vibration |
| Shock (°/h) | ≤0.1 | Zero deviation before and after vibration |
| Resolving power | ≤0.5 | |
Zero deviation change before and after (°/h) | ＜0.2 | |
| Zero bias sensitivity (°/h/GS) | ＜0.5 | |
| Storage temperature | －50℃~70℃ | |
| Operating temperature | －40℃~60℃ |
2.2 Power Supply Requirements
Input voltage:±5V；
Power precision:±5%；
Power Ripple:＜50mV；
Gyroscopic power consumption:≤ 6W.
2.3 Insulation Requirements
Measuring the insulation resistance between individual signals and shells with 100V Megohmeter at 20 C (room temperature) ≥20 MΩ
2.4 Structural Dimensions
Outline size:70mm×70mm×32mm,tolerance:±0.1mm；
Installation dimension:62 mm×62mm,tolerance:±0.1mm；
Flatness of Product Installation Surface:＜0.1mm
2.5 Weight
＜250g
