Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
19 Inch Master Touch Frame Sticking Capacitive Touch Screen Module
1. Product Description
The Touch Screen Module can be divided into three types according to the way of lamination: full lamination, 0 lamination, and frame lamination.
Frame sticking, also known as oral adhesive sticking, is the most common sticking method currently used, that is, simply fixing the touch screen to the four sides of the LCD display screen with double-sided tape. Because of its low cost and simple application, it is favored by small and medium-sized manufacturers.
2. Genaral Specification
2.1 LCD
| Model | DV190E0M-N11 |
| Size | 19 inch |
| Resolution | 1280(RGB)×1024 SXGA 86PPI |
| Luminance | 250 (Typ.) |
| Contrast | 1000 : 1 (Typ.) |
| Viewing Angles | 89/89/89/89 (Typ.)(CR≥10) |
| Signal System | 30 pins LVDS (2 ch, 8-bit) |
| Operating frequency | 60Hz |
| Driving Voltage | 5.0V (Typ.) |
TFT thickness | 9.9mm |
2.2 Touch Panel
| Outline Dimension | 415.8*340.45 | mm |
| View Area | 376.32*301.02(19 inch) | mm |
| TP thickness | 3.9 | mm |
| Total | 14.8 | mm |
| Touch IC | -- | |
| Number of touchpoint | 10 | points |
| Number of button | -- | - |
Interface information driven plate | USB | - |
| The active information | -- | -- |
| The type of Bonding with LCD | Frame bonding | |
| Operation Temperature | -20℃~70℃ | ℃ |
Storage (cannot exceed 6 months) | Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH | ℃ |
| Temperature: -30~80℃ (After installation) | ℃ |
| Item | Content |
| Transparency | 85±10% |
2.4 Electrical Spec.
| ESD Touch Side (Touch) | 4kv |
| ESD Touch Side (Air) | 8kv |
3. Reliability
| Item | Specifications | Remark |
High Temperature Operation | 70ºC, 48hrs | -- |
| Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
Operating Temperature/ Humidity | 60ºC/90%RH, 500hrs | Non-condensing |
| Thermal Shock | -30 ~ 80℃, 60 mins/cycle, total 48 cycles | -- |
4. Drawing
5. Details
6. Notice
Due to the system of capacitive touch screen is made of glass, Please do not strong impact, The impact,Or Fall from height;
Please do not stack up TPs. Don’t load on TP;
Please do not put the capacitive touch screen itself or FPC direct contact with metal material;
When assembling, please do not bend or strength to pull FPC, Avoid to cause the injured;
When assembling, please do not touch ink face of back of TP, Avoid to scratches;
When assembling, please do not contact the visual area, if have dirty in VA, Recommend the use of anhydrous ethanol to clean;
Operation of the capacitive touch screen, Use finger or conductive touch pen, please; must avoid high voltage and static electricity.
7. FAQ
