Active Member
|
[China]
Address: 307, 6A, ANGU Industrial Park, No. 8, Dongwang Road, SIP, Suzhou, Jiangsu Province, China 215 123.
Contact name:Rocky
Sinotectronics Inc. |
|
|
17 Inch ILI2510 Controller Optical Bonding Technology LCD Touch Screen
1. Product Description
Master Touch 17 inch Touch Panel+LCM (Optical Bonding) is the lamination of touch panel and the LCD module through optical bonding technology with OCA or LOCA (Whether OCA or LOCA is chosen depends of the application of the product or the LCD used.) that fills air gaps between components in LCD displays and the touch panel, improving brightness, contrast and enhancing shock resistance, stress mitigation, also reducing the parallax. In this way, the display and the touch screen are completely glued together without gaps, which isolates dust and water vapor to keep the screen clean.
2. Genaral Specification
2.1 LCD
| Item | CONTENTS |
| Model | G170ETN01.0 |
| Size | 17 inch |
| Resolution | 1280(RGB)×1024 [SXGA] 96PPI |
| Luminance | 350 (Typ.) |
| Contrast | 1000 : 1 (Typ.) |
| Viewing Angles | 85/85/80/80 (Typ.)(CR≥10) |
| Signal System | LVDS (2 ch, 8-bit) , terminal , 30 pins |
| Operating frequency | 60Hz |
| Driving Voltage | 5.0V (Typ.) |
| TFT Thickness | 18mm |
2.2 Touch Panel
| Outline Dimension | 362.5*300.5mm |
| View Area | 338.92*271.34mm |
| TP Thickness | 2.9mm |
| Total | 21.3mm |
| Touch IC | ILI2510 |
| Touch points | 10 |
| Interface | USB |
| TP+LCM Bonding Type | Frame Bonding |
| Operation Temperature | -20℃~70℃ |
Storage (cannot exceed 6 months)
| Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH |
| Temperature: -30~80℃(After installation) |
| Item | Content |
| Transparency | 85±10% |
2.4 Electrical Spec.
| ESD Touch Side (Touch) | 4kv |
| ESD Touch Side (Air) | 8kv |
3. Reliability
| Item | Specifications | Remark |
High Temperature Operation | 70ºC, 48hrs | -- |
| Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
Operating Temperature/ Humidity | 60ºC/90%RH, 500hrs | Non-condensing |
| Thermal Shock | -30 ~ 80℃, 60 mins/cycle, total 48 cycles | -- |
4. Drawing
5. Inspection
Equipment/materials: light box, ion fan, humidifier, film card, alcohol/ethyl acetate, finger cover, dust-free cloth, Vernier/digital caliper.
Inspection environment: 30cm ± 5cm from the product, temperature: 22 ± 2 ℃; humidity: 40% ~ 70% RH; cleanliness: Level 10000.
Inspection angle: vertical rotation angle: ± 30 °, from top to bottom; horizontal rotation angle: ± 30 °, from left to right.
Inspection illuminance: fluorescent lamp inspection area illuminance: 150
0-1800lux; table lamp inspection area illuminance: 1500-1800lux; It is convenient for internal uniform illumination requirements.
Background color: Black/white.
Inspection time: the inspection time of one piece of product shall not exceed 15 seconds.
6. Details
7. FAQ
