STM32F103C8T6 microcontroller 32BIT Cortex M3 64KB 20KB RAM 2X12 ADC MCU chip

IN stock microcontroller 32BIT Cortex M3 64KB 20KB RAM 2X12 ADC MCU chip STM32F103C8T6

Medium-density performance line Arm®-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 com. interfaces
 

Features
Arm® 32-bit Cortex®-M3 CPU core
  – 72 MHz maximum frequency, 1.25 DMIPS / MHz (Dhrystone 2.1) performance at 0 wait state memory access
  – Single-cycle multiplication and hardware division 

Memories
  – 64 or 128 Kbytes of Flash memory
  – 20 Kbytes of SRAM  Clock, reset and supply management
  – 2.0 to 3.6 V application supply and I/Os
  – POR, PDR, and programmable voltage detector (PVD)
  – 4 to 16 MHz crystal oscillator
  – Internal 8 MHz factory-trimmed RC
  – Internal 40 kHz RC – PLL for CPU clock
  – 32 kHz oscillator for RTC with calibration

Low-power
  – Sleep, Stop and Standby modes
  – VBAT supply for RTC and backup registers

2x 12-bit, 1 µs A/D converters (up to 16 channels)
  – Conversion range: 0 to 3.6 V
  – Dual-sample and hold capability
  – Temperature sensor  DMA
  – 7-channel DMA controller
  – Peripherals supported: timers, ADC, SPIs, I 2Cs and USARTs

Up to 80 fast I/O ports
  – 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
 

Debug mode
  – Serial wire debug (SWD) and JTAG interfaces 

Seven timers
  – Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  – 16-bit, motor control PWM timer with dead-time generation and emergency stop
  – Two watchdog timers (independent and window)
  – SysTick timer 24-bit downcounter 

Up to nine communication interfaces
  – Up to two I2C interfaces (SMBus/PMBus®)
  – Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  – Up to two SPIs (18 Mbit/s)
  – CAN interface (2.0B Active)
  – USB 2.0 full-speed interface 

Description

The STM32F103xx medium-density performance line family incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.

The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family. These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.


Specifications

Transportations & Payments


 

Frequently Asked Questions

Shipping:

1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.

Product Type & condition:

Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

be, promptly updated.So please consult the stock situation when you inquire.

Buyer Reading:

1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours