STM32F103VBT6 32 Bit MCU Microcontroller Unit Cortex M3 128k 20kb Ram Lqfp-100

STM32F103VBT6 32 bit microcontroller Cortex M3 128K 20KB RAM LQFP-100

Specifications

Description 

Medium-density performance line Arm®-based 32-bit MCU with 64 or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 com. interfaces                                                                                                  

The STM32F103xx medium-density performance line family incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.

The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.

Features                                                                                                               

Arm 32-bit Cortex-M3 CPU core

– 72 MHz maximum frequency, 1.25 DMIPS / MHz (Dhrystone 2.1) performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

Memories

– 64 or 128 Kbytes of Flash memory

– 20 Kbytes of SRAM

Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4 to 16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC

– PLL for CPU clock

– 32 kHz oscillator for RTC with calibration

Low-power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

2x 12-bit, 1 µs A/D converters (up to 16 channels)

– Conversion range: 0 to 3.6 V

– Dual-sample and hold capability

– Temperature sensor

DMA

– 7-channel DMA controller

– Peripherals supported: timers, ADC, SPIs, I 2Cs and USARTs

Up to 80 fast I/O ports

– 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

Applications                                                                                                        

These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.        

Frequently Asked Questions                                                                               

Shipping:

1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.

Product Type & condition:

Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

be, promptly updated.So please consult the stock situation when you inquire.

Buyer Reading:

1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours

on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within 12 hours