Home Companies Shenzhen Retechip Electronics Co., Ltd

Espressif RF Wifi Integrated Circuit ESP32-S2 SoC MCU QFN 56pin

Shenzhen Retechip Electronics Co., Ltd

Contact Us

[China] country

Trade Verify

Address: Room L, 23rd Floor, Building B, Duhui 100, Zhonghang Rd, Futian District, Shenzhen City, Guangdong

Contact name:Allen Wang

Inquir Now

Shenzhen Retechip Electronics Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Espressif RF Wifi Integrated Circuit ESP32-S2 SoC MCU QFN 56pin

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

ESP32-S2 ESP32-S2FH2 ESP32-S2FH4 ESP32-S2FN4R2 ESP32-S2R2

Espressif WIFI RF Chip ESP32-S2 SoC SMD Wi-Fi IC singal-core MCU QFN 56-pin

> Description

ESP32-S2 family is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to Internet of Things (IoT), wearable electronics and smart home.

ESP32-S2 family includes a Wi-Fi subsystem that integrates a Wi-Fi MAC, Wi-Fi radio and baseband, RF switch, RF balun, power amplifier, low noise amplifier (LNA), etc. The chip is fully compliant with the IEEE 802.11b/g/n protocol and offers a complete Wi-Fi solution. At the core of this chip is an Xtensa® 32-bit LX7 CPU that operates at up to 240 MHz. The chip supports application development, without the need for a host MCU. The on-chip memory includes 320 KB SRAM and 128 KB ROM. It also supports multiple external SPI/QSPI/OSPI flash and external RAM chips for more memory space.

ESP32-S2 family is designed for ultra-low-power applications with its multiple low-power modes. Its featured fine-grained clock gating, dynamic voltage and frequency scaling, and adjustable power amplifier output power, contribute to an optimal trade-off between communication range, data rate and power consumption. The device provides a rich set of peripheral interfaces including SPI, I2S, UART, I2C, LED_PWM, LCD interface, camera interface, ADC, DAC, touch sensor, temperature sensor, as well as 43 GPIOs. It also includes a full-speed USB On-The-Go (OTG) interface to enable USB communication.

ESP32-S2 family has several dedicated hardware security features. Cryptographic accelerators are integrated for AES, SHA and RSA algorithms. Additional hardware security features are provided by the RNG, HMAC and Digital Signature modules as well as flash encryption and secure boot signature verification features. These features allow the device to meet stringent security requirements.

  

Applications

• Generic Low-power IoT Sensor Hubs

• Generic Low-power IoT Data Loggers

• Cameras for Video Streaming

• Over-the-top (OTT) Devices

• USB Devices

• Speech Recognition

• Image Recognition

• Mesh Networks

• Home Automation

– Light control

– Smart plugs

– Smart door locks

• Smart Buildings

– Smart lighting

– Energy monitoring

• Industrial Automation

– Industrial wireless control

– Industrial robotics

• Smart Agriculture

– Smart greenhouses

– Smart irrigation

– Agriculture robotics

• Audio Applications

– Internet music players

– Live streaming devices

– Internet radio players

– Audio headsets

• Health Care Applications

– Health monitoring

– Baby monitors

• Wi-Fi-enabled Toys

– Remote control toys

– Proximity sensing toys

– Educational toys

• Wearable Electronics

– Smart watches

– Smart bracelets

• Retail & Catering Applications

– POS machines

– Service robots

• Touch Sensing Applications

– Waterproof design

– Distance sensing applications

– Linear slider, wheel slider designs

> Features

Wi-Fi

• IEEE 802.11 b/g/n-compliant

• Supports 20 MHz, 40 MHz bandwidth in 2.4 GHz band

• Single-band 1T1R mode with data rate up to 150 Mbps

• WMM

• TX/RX A-MPDU, RX A-MSDU

• Immediate Block ACK

• Fragmentation and defragmentation

• Automatic Beacon monitoring (hardware TSF)

• 4 × virtual Wi-Fi interfaces

• Simultaneous support for Infrastructure Station, SoftAP, and Promiscuous modes Note that when ESP32-S2 family is in Station mode and performs a scan, the SoftAP channel will change along with the Station channel.

• Antenna diversity

• 802.11mc FTM CPU and Memory

• Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz

• 128 KB ROM

• 320 KB SRAM

• 16 KB SRAM in RTC

• Embedded flash and PSRAM (see details in Chapter 1: Family Member Comparison)

• SPI/QSPI/OSPI supports multiple flash and external RAM chips Advanced Peripheral Interfaces

• 43 × programmable GPIOs

• 2 × 13-bit SAR ADCs, up to 20 channels

• 2 × 8-bit DAC

• 14 × touch sensing IOs

• 4 × SPI

• 1 × I2S

• 2 × I2C

• 2 × UART

• RMT (TX/RX)

• LED PWM controller, up to 8 channels

• 1 × full-speed USB OTG

• 1 × temperature sensor

• 1 × DVP 8/16 camera interface, implemented using the hardware resources of I2S

• 1 × LCD interface (8-bit serial RGB/8080/6800), implemented using the hardware resources of SPI2

• 1 × LCD interface (8/16/24-bit parallel), implemented using the hardware resources of I2S

• 1 × TWAI® controller compatible with ISO 11898-1 (CAN Specification 2.0) Security

• Secure boot

• Flash encryption

• 4096-bit OTP, up to 1792 bits for users

• Cryptographic hardware acceleration: – AES-128/192/256 (FIPS PUB 197) – Hash (FIPS PUB 180-4)

Specifications  

Product AttributeAttribute Value
Espressif
Product Category:RF System on a Chip - SoC
Wi-Fi
LX7
2.4 GHz
150 Mbps
19.5 dBm
- 75 dBm
1.8 V
3.6 V
68 mA
310 mA
128 kB
- 40 C
+ 105 C
QFN-56
Reel
ADC Resolution:12 bit
Data Bus Width:32 bit
Data RAM Size:320 kB
Data RAM Type:SRAM
Interface Type:I2C, I2S, SPI, UART
Length:7 mm
Maximum Clock Frequency:240 MHz
Moisture Sensitive:Yes
Mounting Style:SMD/SMT
Number of ADC Channels:20 Channel
Number of I/Os:43 I/O
Number of Timers:4 Timer
Program Memory Type:ROM

> Trading Guide

Shipping:

---Delivery period: For in-stock parts, orders are estimated to ship out in 3 days,Once shipped, estimated

   delivery time depends on the below carriers you chose:

» DHL Express, 3-7 business days.
» DHL eCommerce,12-22 business days.
» FedEx International Priority, 3-7 business days
» EMS, 10-15 business days.
» Registered Air Mail, 15-30 business days.

---Shipping rates: After confirming the order, we will evaluate the shipping cost based on the weight of the

    goods.

---Shipping option: We provide DHL, FedEx, EMS, SF Express, and Registered Air Mail international shipping.

---Shipping tracking: We will notify you by email with tracking number once order is shipped.

Returning warranty:

---Returning: Returns are normally accepted when completed within 30 days from date of shipment.Parts

    should be unused and in original packaging. Customer has to take charge for the shipping.

Warranty:

---All Retechip purchases come with a 30day money back return policyThis warranty shall not apply to any

   item where defects have been caused by improper customer assembly, failure by customer to follow

   instructions,product modification, negligent or improper operation.

Ordering:

---T/T,PayPal, Credit Card includes Visa, Master, American Express.

 

 

Hot Products

PCM1808PWR Electronic component Sgl-ended Ana Input 24B 96kHz Stereo ADC IC Chip Features • Two...
MICROCHIP IC MCU 8BIT 128KB FLASH 64TQFP ATMEGA128A-AU 4K X 8 Product Description: Integrated ...
PCM1808PWR Electronic component Sgl-ended Ana Input 24B 96kHz Stereo ADC IC Chip Features • 24-Bit ...
A4953ELJTR-T 8V to 40V 2A 10mA SOIC-8 Ignition controller and driver Electronic Component​ FEATURES ...
AMC3301DWER integrated circuit chips AMC0031 isolated amplifier with integrated DC/DC 16-SOIC -40 to ...
AMC3302DWER Isolation Amplifiers AMC3302 ic integrated circuit SMD/SMT SOIC-16 new original Features ...