|
[China]
Trade Verify
Address: Room L, 23rd Floor, Building B, Duhui 100, Zhonghang Rd, Futian District, Shenzhen City, Guangdong
Contact name:Allen Wang
Shenzhen Retechip Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
SG2525AN Power Led Driver Circuit 500 KHz PDIP-16 Push-Pull 2 Output 500mA 5.1V
Specifications
| Product Attribute | Attribute Value |
|---|---|
| STMicroelectronics | |
| Product Category: | Switching Controllers |
| Push-Pull | |
| 2 Output | |
| 500 kHz | |
| 49 % | |
| 8 V to 35 V | |
| 5.1 V | |
| 500 mA | |
| - 25 C | |
| + 85 C | |
| Through Hole | |
| PDIP-16 | |
| Tube | |
| Product: | Voltage Controllers |
| Product Type: | Switching Controllers |
Description
The SG3525A series of pulse width modulator integrated circuits are designed to offer improved
performance and lowered external parts count when used in designing all types of switching power
supplies. The on-chip + 5.1 V reference is trimmed to ± 1 % and the input common-mode range of
the error amplifier includes the reference voltage eliminating external resistors. A sync input to the
oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system
clock. A single resistor between the CT and the discharge terminals provide a wide range of dead time
ad- justment. These devices also feature built-in soft-start circuitry with only an external timing capacitor
required. A shutdown terminal controls both the soft-start circuity and the output stages, providing
instantaneous turn off through the PWM latch with pulsed shut down, as well as soft-start recycle with
longer shut down commands.
These functions are also control led by an undervoltage lockout which
keeps the out puts off and the soft-start capacitor discharged for sub-normal input voltages. This lockout
circuitry in cludes approximately 500 mV of hysteresis for jitter free operation. Another feature of these
PWM circuits is a latch following the comparator. Once a PWM pulses has been terminated for any reason,
the outputs will remain off for the duration of the period. The latch is reset with each clock pulse. The
output stages are totem-pole designs capable of sourcing or sinking in excess of 200 mA. The SG3525A
output stage features NOR logic, giving a LOW output for an OFF state.
Features
►5.1 V REFERENCE TRIMMED TO ± 1 % .
►100 Hz TO 500 KHz OSCILLATOR RANGE .
►SEPARATE OSCILLATOR SYNC TERMINAL .
► ADJUSTABLE DEADTIME CONTROL
►INTERNAL SOFT-START .
►PULSE-BY-PULSE SHUTDOWN .
►INPUT UNDERVOLTAGE LOCKOUT WITH HYSTERESIS .
►LATCHING PWM TO PREVENT MULTIPLE PULSES .
►DUAL SOURCE/SINK OUTPUT DRIVERS
Trading Guides
| Shipping | Delivery period |
For in-stock parts, orders are estimated to ship out in 3
days.
|
| Shipping rates |
After confirming the order, we will evaluate the shipping cost based on the weight of the goods
| |
| Shipping option |
We provide DHL, FedEx, EMS, SF Express, and Registered Air Mail international shipping.
| |
| Shipping tracking |
We will notify you by email with tracking number once order is shipped.
| |
Returning warranty | Returning |
Returns are normally accepted when completed within 30 days from date of shipment.Parts should be unused and in original packaging.Customer has to take charge for the shipping.
|
| Warranty |
All Retechip purchases come with a 30-day money-back return policy, This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation
| |
| Ordering |
Payment
|
T/T,PayPal, Credit Card includes Visa, Master, American Express.
|
