|
[China]
Trade Verify
Address: Block B 1307, Green Square, Huaiyin District, Jinan China
Contact name:Rose
Jinan Lijiang Automation Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
LIJIANG GLASS- FOR WORLD GLASS MACHINE USER SERVICE
Horizontal Glass Washing Machine with Soft Low e Brushes LJWBQJ2500
Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500
Aluminum alloy assembly structure, no scrap concept, permanent use,
High efficiency, energy saving 70% efficiency;
2. The remaining sheet metal parts are sprayed with advanced machinery
Paint or powder;
3. Rubber rollers are made of vulcanized rubber with stainless steel shaft.
4. The cleaning part that comes in contact with water is made of stainless steel.
5. Cleaning department, lift of the whole wind staff, maximum lift: 350mm, easy to clean and maintain.
6. Three pairs of brushes (Ø150mm) stainless steel shaft construction (low-e glass, regular coated glass, and sunshine coated glass can be cleaned without damaging the coated surface).
7. Two sets of special stainless steel aluminum alloy air knife configuration, strong wind, excellent air drying effect, with heating system (with temperature control, optional opening and closing).
8. The fan is equipped with an air filter in the air inlet chamber, which has a large amount of air and has a good air drying effect. The entire fan box is installed at the top of the workshop and has an air filter screen on the side for easy inspection. And cleaning;
9. Gear transmission, frequency control, main drive of digital display, rotation of brush roller in cleaning section are driven by independent belts of upper motor and lower motor respectively, frequency conversion adjustment speed is stable, Achieves highly demanded cleaning of special glass with a long service life;
10. Mechanical button control, washing machine digital display, easy to operate, easy to operate, easy to maintain.
11. Clean the water tank of the outside washing machine, convenient water tank, change water, check, clean the washing machine.
12. PLC control, optional with touch screen display. Convenient for operator operation and maintenance, it can be connected to all manufacturers of edge grinders without gaps. (Please purchase separately if necessary)
1. Maximum glass width: 2500mm (effective maximum: 2650mm)
2. Minimum glass specifications: 400 mm x 400 mm (limited to one row on the left and right)
3. Glass thickness: 3mm-25mm (digital display)
4. Velocity range: Glass thickness within 3-25mm Vmax = 1-12m / min
5. Main drive, brush speed adjustment method: Frequency control
6. Table height: 900 ± 25mm
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100mm |
| Weight | 3940kg |
| Main drive motor | Zhejiang province |
| Brush motor | Zhejiang province |
| High pressure air blower | Guangdong province |
| The water pump | Shanqing |
| brush | Anhui province |
| Rubber roller | Guangdong province |
| Frequency converter | VEICHI/Rexroth |
| Electric parts | Schneider |
►►►Stainless Steel parts showing
►►►The drying section is composed of 2 sets of high-pressure professional air knives.
►►►Glass washer installition in workshop
We can offer 1-section cleaning, 2-section cleaning, or multi-section cleaning.
