Active Member
|
[China]
Address: No. 23, Dongzhi Rd, Guangzhou Development District, Guangzhou, Guangdong, China.
Contact name:Nicole Weng
Guangdong Shengyu Cable Industry Co., Ltd. |
|
|
Black Bare Copper NYM Pvc Coated Electrical Wire For Household /
Industrial
Application
Installation cable suitable for household and industrial usage.
Laid on or under plaster, in walls or concrete, without special
mechanical protection, but not in dry or pre-stressed concrete.
Suitable for dry, same as damp or wet environment; for internal or
external application (only if the cable is protected against direct
sunlight).
Standards
HRN HD 21.4 S2
IEC 60227-4
DIN VDE 0250 part 204
Construction
| Conductor: | bare copper conductor acc. to IEC 60228 / HD 383 / DIN VDE 0295 | |
| class 1: | solid (RE construction) | |
| class 2: | multi wire stranded (RM construction) | |
| Insulation: | PVC compound TI1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4 | |
| Filler: | cores enveloped in non-vulcanized rubber or plastic compound | |
| Sheath: | PVC compound TM1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4 | |
| sheath colour: | Black | |
| Core colour marking: | HRN HD 308 S2 / VDE 0293-308 | |
Technical data
| Temperature range: | |
| during installationi: | +5 °C up to +70 °C |
| fixed installed: | -30 °C up to +70 °C |
| at short circuit of max. 5 s: | up to 150 °C |
| Nominal voltage: | Uο/U = 300/500 V |
| Ispitni napon: | 2000 V |
| Minimal inner bending radius: | 6D |
| Behaviour in fire: | IEC 60332-1 |
| Dimensions – number of cores x conductor cross-section | Construction* | Construction of individual conductor | External diameter | Conductor resistance at 20 °C | Specific. el. resistance of insulation at 70 °C | Short circuit current 1s | Permited tensile load | Cable weight | Packing** |
| nominal | min-max. | max. | min. | nominal | max. | cca | |||
| mm² | n x mm | mm | Ω/km | MΩkm | kA | N | kg/km | ||
| 1 x 1,5 | RE | 1 x 1,38 | 5,2 - 6,2 | 12,10 | 0,0100 | 0,17 | 75 | 45 | CUT |
| 1 x 2,5 | RE | 1 x 1,78 | 5,8 - 6,8 | 7,41 | 0,0094 | 0,29 | 125 | 70 | CUT |
| 1 x 4 | RE | 1 x 2,26 | 6,4 - 7,6 | 4,61 | 0,0087 | 0,46 | 200 | 80 | CUT |
| 1 x 6 | RE | 1 x 2,70 | 6,8 - 8,2 | 3,08 | 0,0074 | 0,69 | 300 | 105 | CUT |
| 1 x 10 | RE | 1 x 3,5 | 8,0 - 9,4 | 1,83 | 0,0072 | 1,15 | 500 | 155 | CUT |
| 1 x 16 | RM | 7 x 1,70 | 9,4 - 11,0 | 1,15 | 0,0053 | 1,84 | 800 | 230 | CUT |
| 1 x 25 | RM | 7 x 2,13 | 12,2 - 13,3 | 0,73 | 0,0051 | 2,88 | 1250 | 325 | CUT |
| 2 x 1,5 | RE | 1 x 1,38 | 8,4 - 9,8 | 12,10 | 0,0100 | 0,17 | 150 | 115 | c.100 |
| 2 x 2,5 | RE | 1 x 1,78 | 9,6 - 11,0 | 7,41 | 0,0094 | 0,29 | 250 | 190 | c.100 |
| 2 x 4 | RE | 1 x 2,26 | 11,0 - 12,5 | 4,61 | 0,0087 | 0,46 | 400 | - | CUT |
| 3 x 1,5 | RE | 1 x 1,38 | 8,8 - 10,5 | 12,10 | 0,0100 | 0,17 | 225 | 135 | c.50, c.100 |
| 3 x 2,5 | RE | 1 x 1,78 | 10,0 - 11,5 | 7,41 | 0,0094 | 0,29 | 375 | 190 | c.100, B500 |
| 3 x 4 | RE | 1 x 2,26 | 11,5 - 13,0 | 4,61 | 0,0087 | 0,46 | 600 | 265 | CUT |
| 3 x 6 | RE | 1 x 2,70 | 12,0 - 15,0 | 3,08 | 0,0074 | 0,69 | 900 | 315 | CUT |
| 3 x 10 | RE | 1 x 3,5 | 16,0 - 18,0 | 1,83 | 0,0072 | 1,15 | 1500 | 465 | CUT |
| 4 x 1,5 | RE | 1 x 1,38 | 9,5 - 11,0 | 12,10 | 0,0100 | 0,17 | 300 | 160 | c.100 |
| 4 x 2,5 | RE | 1 x 1,78 | 11,0 - 12,5 | 7,41 | 0,0094 | 0,29 | 500 | 230 | c.100 |
| 4 x 4 | RE | 1 x 2,26 | 12,5 - 14,5 | 4,61 | 0,0087 | 0,46 | 800 | 330 | c.100, CUT |
| 4 x 6 | RE | 1 x 2,70 | 14,5 - 16,5 | 3,08 | 0,0074 | 0,69 | 1200 | 460 | c.50, CUT |
| 4 x 10 | RE | 1 x 3,5 | 16,5 - 19,0 | 1,83 | 0,0072 | 1,15 | 2000 | 690 | CUT |
| 4 x 16 | RM | 7 x 1,70 | 20,5 - 23,5 | 1,15 | 0,0053 | 1,84 | 3200 | 1090 | CUT |
| 4 x 25 | RM | 7 x 2,13 | 25,0 - 28,5 | 0,73 | 0,0051 | 2,88 | 5000 | 1640 | CUT |
| 4 x 35 | RM | 7 x 2,52 | 27,5 - 32,0 | 0,52 | 0,0045 | 4,02 | 7000 | 2090 | CUT |
| 5 x 1,5 | RE | 1 x 1,38 | 9,9 - 12,0 | 12,10 | 0,0100 | 0,17 | 375 | 190 | c.100, dr500 |
| 5 x 2,5 | RE | 1 x 1,78 | 11,5 - 13,5 | 7,41 | 0,0094 | 0,29 | 625 | 270 | c.100, dr500 |
| 5 x 4 | RE | 1 x 2,26 | 14,0 - 16,5 | 4,61 | 0,0087 | 0,46 | 1000 | 410 | c.100, CUT |
| 5 x 6 | RE | 1 x 2,70 | 15,5 - 18,0 | 3,08 | 0,0074 | 0,69 | 1500 | 540 | c.50, CUT |
| 5 x 10 | RE | 1 x 3,5 | 18,0 - 21,0 | 1,83 | 0,0072 | 1,15 | 2500 | 850 | CUT |
| 5 x 10 | RM | 7 x 1,35 | 18,5 - 21,5 | 1,83 | 0,0065 | 1,15 | 2500 | 870 | CUT |
| 5 x 16 | RM | 7 x 1,70 | 22,5 - 26,0 | 1,15 | 0,0053 | 1,84 | 4000 | 1350 | CUT |
| 5 x 25 | RM | 7 x 2,13 | 27,5 - 31,5 | 0,73 | 0,0051 | 2,88 | 6250 | 1990 | CUT |
| 7 x 1,5 | RE | 1 x 1,38 | 11,0 - 13,0 | 12,10 | 0,0100 | 0,17 | 525 | 235 | c.100, CUT |
| 10 x 1,5 | RE | 1 x 1,38 | 13,9 - 15,6 | 12,10 | 0,0100 | 0,17 | 750 | 330 | CUT |
| 12 x 1,5 | RE | 1 x 1,38 | 14,2 - 16,1 | 12,10 | 0,0100 | 0,17 | 900 | 400 | CUT |
| 7 x 2,5 | RE | 1 x 1,78 | 12,7 -14,3 | 7,41 | 0,0094 | 0,29 | 875 | 350 | CUT |
*) Construction: RE = single wire round conductor RM = multi wire
round conductor
**) Packing: c.50 = coil 50 m, c.100 = coil 100 m, d.500 = drum 500
m
