|
[China]
Trade Verify
Address: 1st Floor, B Block, Jiada R&D Building, Nanshan, Shenzhen, China
Contact name:Dieky Lin
Shenzhen Chuangyin Co., Ltd. |
|
Verified Suppliers
|
|
|
Separable Connectors 200 A, 15 kV Class Insulated Cap Cable Cap Cable Connector
Application
Chuangyin® Insulated Cap is widely applicable for terminating and insulating energized bushings, including bushing inserts, loadbreak junctions, feed-thru inserts, etc. in 200 A power network.
The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.
Features
Made of high quality EPDM rubber
Fully shielded, insulated and submersible
Terminating and insulating cap 15 kV, 200 A energized interfaces
100% factory tested
In compliance with IEC standard 386
Construction
1. Insulating Layer
2. Semi-conducting Shield
3. Semi-conducting Insert
4. Probe
5. Grounding Tab
Technical Data
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 8.3/14.4 kV |
| Rated Current | 200 A |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Partial Discharge | 15kV, ≤10 pC |
| BIL | 95 kV |
| Thermal Current | 10 kA, 0.6 s |
| Dynamic Current | 20 kA, 10 ms |
Kit Contents
Insulated Cap
Wipers
Silicone Grease
Installation Instruction
Certificate
Ordering Instructions
| Product | Part Number |
| IEEE 15 kV, 200 A Insulated Cap | CYS-ASJM-15/200 |
