|
[China]
Trade Verify
Address: 1st Floor, B Block, Jiada R&D Building, Nanshan, Shenzhen, China
Contact name:Dieky Lin
Shenzhen Chuangyin Co., Ltd. |
|
Verified Suppliers
|
|
|
Busbar Connection System 200A, 15 kV Class Loadbreak Feed-thru Bushing Insert
Application
Chuangyin® Loadbreak Feed-thru Bushing Insert is widely applicable for connecting into a standard 200A bushing well, as its two electrically interconnected bushing interfaces. It can convert radial-feed transformers to feedthru transformers and add in-line arrester protection if needed.
The interface complys with IEEE standard 386, 8.3/14.4 kV, 200 A loadbreak design.
Features
Made of high quality EPDM rubber
With two electrically interconnected bushing interfaces
Fully shielded, insulated and submersible connection for loadbreak system
Torque limit ratchet prevents the bushing well stud from breaking during installation
100% factory tested
In compliance with IEC standard 386
Construction
1. Insulating Layer
2. Torque Limit Ratchet
3. Semi-conducting Shield
4. Probe
5. Indicator Ring
6. Arc Quenching Rod
7. Thread
8. Locking Groove
Technical Data
| Item | Parameters |
| Voltage Class | 15 kV |
| Voltage Rating | 8.3/14.4 kV |
| Rated Current | 200A |
| AC Withstand Voltage 5min | 39 kV |
| DC Withstand Voltage 15min | 35 kV |
| Partial Discharge | 15 kV, ≤10 pC |
| BIL | 95 kV |
| Thermal Current | 10 kA, 0.6 s |
| Dynamic Current | 20 kA, 10 ms |
Kit Contents
Feed-thru Bushing Insert
Dustproof Cap
Bail Assembly
Wipers
Silicone Grease
Installation Instruction
Certificate
Probe
Certificate
Ordering Instructions
| Product | Part Number |
| 15 kV, 200A Feed-thru Bushing Insert | CYS-AST-15/200 |
