Portable Pcb Mopa Flying Fiber Marking Machine With 3 Years
Warranty
Descriotion:
1. mini fiber laser marking machine with pre-loaded legitimate
computer operating systems, broke away from the shortcomings of
traditional marking machine which need equipped with extra
computer, you just do some simple steps and Mini Fiber Laser
Marking machine will enter work mode.
2. mini fiber laser marking machine made from Germany aluminum
alloy material imported from Germany, with 132 fabricating
processes and 52 manual assembly processes, you will cannot help
liking it.
3. mini fiber laser marking machine has small and compact structure
installed with the computer system, the laser control system, the
motion control system and humanized design. Above all the
installment is convenient.
Technical Data:
Laser power | 10W/20W/30W/50W |
Marking area | 110*110mm,200mm*200mm,300*300mm |
Laser wave length | 1064nm |
Frequency of pulse | 20KHz~100KHz |
Max marking depth | ≤0.2mm(according to power and material) |
Marking speed | 0-9000mm/s |
Minimum line width | 0.01mm |
Marking content | Text,pattern,date,bar code,etc |
Minimum character | 0.2mm |
Repeated accuracy | ±0.001mm |
Graphic format supported | bmp, jpg, gif, tga, png,tif,ai,dxf,dst,plt,etc. |
Power supply | AC220V±10% 50Hz,or AC110V±10% 60Hz |
Operation system | Microsoft Windows XP or Windows 7 |
Operation temperature | 5℃-40℃ |
Supply Voltage | 220V/50Hz/10A |
Cooling method | Air cooling |
Feture:
Rotary Marking Stainless Steel
From paint thickness gauges and microscope dials to sensor bodies
and containers, laser marking is fast becoming the standard method
in many industries. High quality crisp text and graphics are
possible (text down to 0.6mm high) with better durability than ink
and paint applied processes
Anodised Aluminium Gauges
Anodised aluminium has excellent product finish and also provides
an ideal medium for laser marking. Crisp clear marking with
extremely good contrast makes the text and graduations very easy to
read. Laser marking allows very fine lines to be produced, like
those needed on the vernier scale shown.
Plastic Parts
Many types of plastic can be laser marked which has the advantage
of being a permanent mark that cannot wear off, unlike paint and
ink applied processes. This is especially important in medical
applications (the lower part) where the identification codes need
to be permanent and have no toxic effect.
Medical Assembly
All parts of this surgical trocar assembly (steel and plastic) are
laser marked with sizes, part numbers, batch codes and the
manufacturer’s logo. As these are re-usable items that will go
through many sterilisation cycles, it is important that the mark is
highly resistant to wear.
Clean Surface Plate
This laser cut stainless steel control panel operates in a hostile
environment, so the text and graphics must be able to withstand
this. This is achieved by laser marking as the surface of the
material is permanently changed by the process. This is unlike ink
and paint applied processes where the information can be worn or
dissolved away.
Dash Board Panels
A relatively cheap option for consoles and panels is to use
aluminium. These can be anodised in a wide range of colours and
laser marked with text and graphics. This method gives excellent
aesthetic results and weighs considerably less than a steel
alternative. XTLASER can laser cut the material to shape prior to
marking.
Application: