|
[China]
Trade Verify
Address: Yinzhou,Ningbo,China
Contact name:Michael
Ningbo Haijiang Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
HJF200 ton injection molding machine
Injection Unit:
1. High Quality Linear Motion Guide ensure the smooth &
accuracy of injection process
2. High Speed & Pressure injection structure can improve the
injection speed
3. Twin nozzle cylinder ensures more even & stable structure
4. Specilized screw barrel design for various appliance
Adjustment Unit
Automatic Mold Height Adjustment Saves the time and cost during the
mold changing.
Clamping Unit
The plates were designed using FEM software, ensuring a stable and
rigid clamping system. Five point inward moving double toggle
system ensures high rigidity and precision for mold clamping and
also reducing stress and Strain effects.
Hydraulic Unit
The hydraulic system using the world famous pump and control valve
can control the machine running precisely, ensuring the precision,
reliability and durability of whole machine.
Injection Unit
Dual-pillar supporting and dual-cylinder injection balance devices
ensure the stress on screw balanced during injection.
Specific screw and barrel designs are available for processing
different material requirements.
| SPECIFICATION | HJF200 | |||
| Screw Type | A | B | C | |
| Screw Diameter | Mm | 45 | 50 | 55 |
| Screw L/D Ration | L/D | 20 | 18.8 | 18.8 |
| Shot Size(Theoretical) | cm3 | 349 | 431 | 522 |
| Injection Weight(PS) | g | 314 | 388 | 470 |
| Injection Rate | g/s | 136 | 170 | 185 |
| Injection Pressure | MPa | 220 | 180 | 150 |
| Screw Speed | rpm | 0~185 | ||
| Clamping Force | KN | 2000 | ||
| Opening stroke | Mm | 450 | ||
| Space Between Tie Bars | mm | 500*470 | ||
| Max.Mold Height | mm | 500 | ||
| Min.Mold Height | mm | 180 | ||
| Ejector Stroke | mm | 130 | ||
| Ejector Tonnage | KN | 45 | ||
| Max.Pump Pressure | MPa | 16 | ||
| Pump Motor Power | KW | 18.5 | ||
| Heater power | KW | 7.5 | ||
| Machine Dimension(L*W*H) | M | 5.3*1.4*1.9 | ||
| Machine weight | T | 5.8 | ||
| Oil Tank Capacity | L | 240 | ||
Haijiang Machinery Main configuration
Standard machinery
| PLC | PORCHESON (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | LS (KOREA) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
