|
[China]
Trade Verify
Address: Yinzhou,Ningbo,China
Contact name:Michael
Ningbo Haijiang Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
HJF 240 ton servo plastic injection molding machine
Show High Precision: The accurate injection positioning,pressure, speed and pressure
maintaining,to ensure the repeatability error of injection accuracy
less than 0.3% to achieve precision molding.
Super Energy-Saving Features: Compared with standard injection machine,the energy saving rate
can reach 40%-70% for the same plastic production.
High Efficiency: Compared with standard machine,the total efficiency can increase
by 10% and dragging capacity is can increase by18%.
High Response System:The system acceleration and deceleration performance is quite agile
and force&speed regulation is very sensitive.The sampling
processing speed can reach 100KHZ and system quick start time can
reach 0.05s.
Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining
is smooth and accurate.
Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation
during operation.Improve the operation performance.promote using
efficiency and save a large quantity of cooling water.
Electronically Controlled Unit
1.CPU controller and display are independent and reliable.
2.A larger color LCD screen enhances clear display and supports
Multi language compatibility.
3.The control system also supports remote monitor. In the event of
a control problems, the machine can be connected to internet
through a special interface. Inject service can realize remote
fault diagnosis and maintenance.
4.A screen saver function extends the LCD life.
5.Ultra bright LED is provided for input and output point
inspection. Proving convenient indication of the machine’s
operation and machine service
6.A data hardware lock is provided to prevent unauthorized people
from effecting the machines performance.
7.Closed Loop PID barrel temperature control.
Dust and waterproof control cabinets provide a neat and tidy enclosure all electrical control components.
| SPECIFICATION | HJF240 | |||
| Screw Type | A | B | C | |
| Screw Diameter | Mm | 50 | 55 | 60 |
| Screw L/D Ration | L/D | 22.2 | 20 | 18.2 |
| Shot Size(Theoretical) | cm3 | 508 | 593 | 706 |
| Injection Weight(PS) | g | 462 | 534 | 642 |
| Injection Rate | g/s | 148 | 179 | 202 |
| Injection Pressure | MPa | 180 | 160.8 | 128 |
| Screw Speed | rpm | 0~180 | ||
| Clamping Force | KN | 2400 | ||
| Opening stroke | Mm | 490 | ||
| Space Between Tie Bars | mm | 530*510 | ||
| Max.Mold Height | mm | 530 | ||
| Min.Mold Height | mm | 200 | ||
| Ejector Stroke | mm | 165 | ||
| Ejector Tonnage | KN | 70 | ||
| Max.Pump Pressure | MPa | 16 | ||
| Pump Motor Power | KW | 18.5 | ||
| Heater power | KW | 11.65 | ||
| Machine Dimension(L*W*H) | M | 5.4*1.5*2 | ||
| Machine weight | T | 7 | ||
| Oil Tank Capacity | L | 340 | ||
Haijiang Machinery Main configuration
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
