|
[China]
Trade Verify
Address: Yinzhou,Ningbo,China
Contact name:Michael
Ningbo Haijiang Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
HJF-580 servo injection molding machine
The control system also support remote monitor.In the event of a control problems,the machine can be connected to internet through a special interface.Inject service can realize remote fault diagnosis and maintenance.
A screen saver function extends the LCD life.
Adjustment Unit
Automatic mold height adjustment saves the time and cost during the mold changing.
Clamping Unit
The plates were designed using FEM software,ensuring a stable and rigid clamping system.Five point inward moving double toggle system ensures high rigidity and precision for mould clamping and also reducing stress and strain effects.
Hydraulic Unit
The hydraulic system using the world famous pump and control valve can control the machine running precisely,ensuring the precision,reliability and durability of whole machine.
Injection Unit
Dual-pillar supporting and dual-cylinder injection balance devices ensure the stress on screw balanced during injection.Specific screw and barrel designs are available for processing different material requirements.
| SPECIFICATION | HJF-580 | |||||||
| A | B | C | D | |||||
| Screw diameter | mm | 80 | 85 | 90 | 95 | |||
| Screw L/D Ratio | L/D | 22 | 20.9 | 19.8 | 18.6 | |||
| Shot size(theoretical) | cm³ | 2210 | 2495 | 2797 | 3117 | |||
| Injection weight(PS) | g | 1989 | 2245 | 2517 | 2800 | |||
| Injection pressure | Mpa | 195 | 180 | 160 | 148 | |||
| Injection rate | g/s | 430 | 495 | 550 | 602 | |||
| Screw Speed | rpm | 150 | ||||||
| Clamp tonnage | KN | 5800 | ||||||
| Opening stroke | mm | 850 | ||||||
| Space between the tie bars | mm | 850*820 | ||||||
| Max.Mold Height | mm | 850 | ||||||
| Min.Mold Height | mm | 330 | ||||||
| Ejector stroke | mm | 230 | ||||||
| Ejector tonnage | KN | 175 | ||||||
| Max.pump pressure | Mpa | 16 | ||||||
| Pump motor power | KW | 55 | ||||||
| Heater power | KW | 34 | ||||||
| Machine dimension(L*W*H) | M | 8.7*2.10*2.76 | ||||||
| Machine weight | T | 21.5 | ||||||
| Oil tank capacity | L | 900 | ||||||
Haijiang Machinery Main Configuration
| Controller | Arcuchi/Porchesion(50-290T)(China) |
| Techmation(360-3000T)(Taiwan) | |
| Vane pump | Albert(USA) |
| Proportional valve | HJK series Northman(TAIWAN) |
| HJK series Northman(TAIWAN) or TOKIMEC(Japan) | |
| Directional valve | HNC(TAIWAN) or YUKEN(Japan) |
| Electric motor | Dongguan(Guangdong) |
| contactor | Mager(50-290T)/Schneider(China)(360-3000T) |
| High pressure hose | Fute(Ningbo) |
| Five-star hydrauhu | Dandun(China)STAFFA(UK) |
| Air breaker | LS(Korea) |
| Thermal overland relay | Schneider(China) |
| Limit switch | Omoron(Japan) |
| Lubrication pump | Automatic |
| Servo motor | SUMITOMO(Japan) |
| Servo pump | DELTA(Taiwan) |
| Servo sensor | ASHCROFT(Germany) |
