|
[China]
Trade Verify
Address: No 20 Tianshun Road, Yangshan Town, Huishan District, Wuxi, Jiangsu
Contact name:Maggie Zhang
OUCO (Wuxi) Injection Molding Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
What we can do for you?
- Professional pre-sales and after-sales service
- Detailed production schedule updated regularly
- Delivery on time and short production time
- Customize the machine according to your requirements
- Well-trained engineers will offer you any technical support.
Technical Parameter
| CWI-1050S Ⅲ | |||||||||||
| 机型 | 1050S Ⅲ | ||||||||||
| 合模装置 | 锁模力 Kn | Clamping Force | 10500 | ||||||||
| 拉杆间距 mm | Space Between Tie-bars | 1270×1070 | |||||||||
| 开模最大开距 mm | Clamping Stroke | 2700 | |||||||||
| 最大模具 mm | Mould Thickness Max | 1300 | |||||||||
| 最小模具 mm | Mould Thickness Min | 600 | |||||||||
| 模板尺寸 mm | Size of Platen | 1870×1670 | |||||||||
| 顶出长度 mm | Ejector Stroke | 350 | |||||||||
| 顶出力 Kn | Ejector Force | 282 | |||||||||
| 顶针数 | Ejector Quantily | 25 | |||||||||
| 注塑装置 | 射胶配置 | Injection Equipment | 4000I | 6600I | 11000I | ||||||
| 螺杆直径 mm | Screw Diameter | 80 | 85 | 90 | 90 | 100 | 110 | 110 | 120 | 130 | |
| 螺杆长径比 | Screw L/D ratio | 22.3 | 21 | 19.8 | 23.3 | 21 | 19.1 | 22.9 | 21 | 19.4 | |
| 理论射胶容积 cm3 | Shot Size | 2059 | 2325 | 2606 | 3052 | 3768 | 4559 | 5461 | 6500 | 7628 | |
| 实际射胶量 (PS)g | Shot Weight | 1873 | 2115 | 2371 | 2777 | 3428 | 4148 | 4969 | 5915 | 6941 | |
| oz | 66.0 | 74.5 | 83.5 | 99.0 | 122.3 | 148.0 | 177.2 | 210.9 | 247.5 | ||
| 射胶压力 MP | Injection Pressure | 196 | 174 | 155 | 215 | 174 | 144 | 209 | 176 | 145 | |
| 注射速率 mm/s | Injection Rate | 776.0 | 875.0 | 982.0 | 707.0 | 872.0 | 1056.0 | 718.0 | 855.0 | 1003.0 | |
| 射胶速度 cm3/s | Injection Speed | 153 | 110 | 76/93 | |||||||
| 螺杆转速 g/s | Screw Speed | 10~230 | 10~200 | 10~140 | |||||||
| 塑化能力 rpm | Plasticising Capacity | 64.0 | 70.0 | 82.0 | 78.0 | 83.0 | 107.0 | 72.0 | 83.0 | 102.0 | |
| 电力及其他 | 油箱容积 L | Oil Tank Capacity | 1200 | ||||||||
| 电热功率 Kw | Heater Power | 43.85 | 58 | 85 | |||||||
| 电热区数 L | Team Control zone | 5+1 | |||||||||
| 系统压力 MPa | System Pressure Max | 16 | |||||||||
| 油泵输量 L/min | Pump Output | 570 | |||||||||
| 电机功率 Kw | Servo Power | 55+45+7.5 | |||||||||
| 机器净重 ton | Machine Weight | 50 | |||||||||
| 机器尺寸(长×宽×高) mm | Machine Dimension | 11800×3250×2700 | |||||||||
Why choose OUCO?
We are a professional high-tech injection molding machine enterprise with rich experience in manufacturing and selling injection molding machines. Bucket Injection molding Machine is our flagship product .We will customize injection molding solutions for you.
Why choose OUCO high speed fruit bucket injection molding
machine ?
1.Two servo drives, double servo motor power control adopts the
latest confluence technology ,which can not only run at high speed,
but also automatically control the power consumption,so as to
improve the production efficiency.
2.Intelligent motion control for short dry cycle times,we make a
fruit basket in over 17 seconds, the industry average is 20
seconds.
3.Outward turning crankshaft for more freedom,it make the same
clamping force injection machine have the longer opening stroke .
Same need cost less.
4.Linear guide of the rear platen of injection unit,lower friction
but faster response.
5.Our company's lubrication system uses copper pipes for fixed
pipes and soft copper pipes for moving parts, which can increase
the service life of copper pipes.
6.Most of the energy saving in the heating part is the use of
electromagnetic heaters to save energy, and the energy saving rate
is about 30%-70% of the old-fashioned resistance coil.Energy saving
in the power part: most of them use frequency converters. The
energy saving method is to save the excess energy consumption of
the motor.
7. Taiwan Hongxun's latest 15 inch vertical screen touch-screen
computer is selected,which is high-end and beautiful;In addition to
the functions of the whole machine, it Supports the energy
consumption management of the whole machine and the centralized
management of all parameters.
