|
[China]
Trade Verify
Address: No. 6 Huanglongshan South Rd, Wuhan 430205, P.R.China
Contact name:Nancy Jiang
WUHAN GLOBAL SENSOR TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
384x288 / 17μm N-Driver384 Vehicle Mounted Night Vision Infrared
Camera for Safe Driving
N-Driver384 vehicle-mounted infrared module is specially oriented for drivers' safe driving in harsh environment such as total darkness, rain, snow, fog, dust etc. It carries the uncooled LWIR infrared detector with a resolution of 384x288 and a pixel size at 17μm.
Drivers can see clear thermal image 300 meters away beyond the reach of vehicles' headlights and will not worry about the interference of high beams from oncoming vehicles by installing this infrared camera module.
The N-Driver384 infrared camera module has a broad application prospect in the fields of automatic driving, vehicle assisted driving (ADAS) and special vehicle applications.
- Resolution: 384x288
- Pixel Pitch: 17μm
- NETD<50mk
- A Great Distance of View
- All-weather Application
- High Speed Data Transmission
- High Reliability & Stability
| Model | N-Driver 384 |
| IR Detector Performance | |
| Resolution | 384x288 |
| Pixel Pitch | 17μm |
| Spectral Range | 8~14μm |
| NETD | <50mk |
| Image Display Performance | |
| Focal Length | 9.7mm |
| Field of View | 37°×28° |
| Video Output Format | CVBS |
| Output Image Frame Rate & Resolution | PAL 768x576@25Hz |
| System Features | |
| Start-up Time | ≤8s (Room Temperature) |
| Heater | When the Window Temperature is Lower than 2°C±2°C, Start Heating by
Itself When the Window Temperature is Higher than 7°C±2°C, Turn off the Heating by Itself |
| Compensation Algorithm | Automatic Shutter Compensation |
| Image Algorithm | Automatic Brightness Contrast/Image Enhancement |
| Communication Interface | RS232, Baud Rate: 115200bps/CAN Communication, Speed 500kbps |
| Pedestrian/Vehicle Detection | / |
| Electrical Features | |
| Supply Voltage | DC9V~32V |
| Overall Power Consumption | ≤3.5W@24V Power Supply, Window Heating is off ≤9W@24V Power Supply, Window Heating is on |
| Operating Range | |
| Observe Range | Person: 1.8m×0.5m ≥150m Car: 2.3m×2.3m ≥300m |
| Detect Range | / |
| External Cable Connection | |
| Cable Length | 4m |
| Standard External Interface | Power Supply: DC5.5*2.1 Female Connector Video: RCA Lotus Male Connector Serial Port: SM 2.54-3P Male Connector (Pin) |
| Physical Characteristics | |
| Dimension (mm) | 40.0x36.0x58.0 (Without Cable) |
| Weight | 150g±3g (Without Cable) |
| Environmental Adaptation | |
| Operation Temperature | -40°C ~ +85°C |
| Storage Temperature | -45°C ~ +90°C |
| Environmental Test | Salt Spray: ISO16750-4; Harsh Level IV Industrial Solvent: GB/T28046.5-2013 |
| Reliability Test | Vibration: ISO16750-3, Grade A Flame Retardant: GB8410, Grade B Stone Impact: ISO16750-3, Grade A ESD: Contact Discharge ±8KV, Air Discharge ±15KV |
| Package | Sealed Case IP67 |
| Certification | |
| EMC | EMC Test Certification (ISO10605, ISO11452-4, ISO11452-2, ISO7637-2) |
The N-driver 384 automotive thermal imaging camera is widely used in Advanced Driver Assistance System.
1. What is the difference between low light, active IR and thermal imaging?
Low light needs natural light and transforms weak natural light image into enhanced electronic image through image intensifier;
Active IR actively emits infrared light and uses infrared beam reflected by the target. It has very poor concealment;
Thermal imaging doesn’t need any light and is a passive infrared night vision that detects infrared radiation difference between targets and scene or different parts of an object. not be affected by the changes of the surrounding lighting conditions, during night or even in fog, rain and other harsh environments.
2. Can you block thermal imaging?
In most cases, you cannot. But infrared rays can't penetrate walls, and also the glass can block IR. So, if you don’t want to be detected, you can conceal behind glass or walls to block the thermal imaging.
