Shanghai Huitian New Material Co., Ltd |
Verified Suppliers
|
|
Introduction of 720
720A in combination with Hardener 720B is a two-component
polyurerurethane adhesive for various film/film and film/foil
laminates.
The product has the characteristics of high initial adhesion, high
peeling strength, good transparency, and can effectively prevent
the phenomenon of the tunnel.
Properties
1. List of dilution: When the ethyl acetate is used for dilution, to obtain an accurate solid content, it is required to refer to the following solvents
720 A | 720B | Solvent | Solids Content | Viscosity |
20KG | 3KG | 18.6KG | 40% | 20-25s |
20KG | 3KG | 24.6KG | 35% | 13-20s |
20KG | 3KG | 32.5KG | 30% | 12-15s |
20KG | 3KG | 43.6KG | 25% | 10-15s |
* Viscosity is based on the average viscosity of the Zahn cup
3#/25°C
2. Pot life: The ready-for-use adhesive in closed containers has a working time
of about 8 hours. The composite machine is not used up of adhesive,
the retention time of more than 2 hours, if more than 2 hours
should be abandoned, otherwise it may lead to unstable composite
films.
Tropical area (Temperature >28°C + humidity >60%) pot life:
Mixed good adhesive should be used up within 2 hours.
3. Application weight: Depending on the film or foil combination and the end use of the
laminate, the adhesive weight may above 1.8g/m2 dry. For printed
laminates the weight has to be adjusted accordingly.
4. Packaging specifications
8720A:20KG/bucket
8720B:3KG/bucket
5. Others: Film additives-particularly slip agent content in LDPE,MDPE and
CPP films-packed goods, printing inks, pre-treatment and coating of
films are of significant importance to the end use of the laminates
and may affect the performance properties either straight away or
later. Therefore, practical laminating tests as well as checks on
the laminates are necessary before going into full scale
production.
Statement
The information provided herein, especially recommendations for the
usage and the application of our products, is based upon our
knowledge and experience. Due to different materials used as well
as to varying working conditions beyond our control we strictly
recommend to carry out intensive trials to test the suitability of
our products with regard to the required processes and
applications. We do not accept any liability with regard to the
above information or with regard to any verbal recommendation,
except for cases where we are liable of gross negligence or false
intention.
Introduction of Huitian
Established in 1977, Huitian is now one of the biggest adhesive
manufacturers in China. There are four manufacturing bases in
total, providing high performance adhesives for different
industries.
Huitian has two fully automatic productions lines and the capacity
is 24,000MT/Year just for flexibile packaging adhesives.
Huitian's products has been well received by domestic and
international end users
Besides construction adhesives, Huitian also provides many others
kinds of products for different industries, transportation,
electronics, photovaltaic, etc.
Huitian is your reliable partner and satisfy your need of
adhesives!