|
[China]
Trade Verify
Address: No.9 Kaixuan West Road ，Eeconomic Development Zone，Quzhou city，Zhejiang Province ，China
Contact name:Christina
Hangzhou Kaishan Air Compressor Co., Ltd |
|
Verified Suppliers
|
|
|
yn27c pionjar 120 jack hammer petrol YN27C rock drill machine
| Inernal Combustion Rockdrill | |
| model name | YN27C |
| Weight | 27kg (including wooden case:41KG) |
| dimension | 746*315*229mm (including wooden case:810*380*280mm) |
| Fuel consumption | less than 0.12L/min |
| type of engine | single cylinder, air cooled two strokes |
| Cylinder diameter*stroke of piston | 58*70mm |
| Rotating speed of engine | more than 2450r/min |
| displacement of engine piston | 185cm^3 |
| type of carburetor | hand needle valve, no floating type |
| Ignition system | controllable silicon/ contactless system |
| Drilling speed | more than 250mm/min |
| Max drilling depth | 6M |
| Tank capacity | more than 1.14L |
| mixture ratio of gasoline and lubricating oil(in volumes) | 8∶1 |
| end of drill rod dimensions | 22*108mm |
| Rotating speed of drill rod | more than 200r/min |
| Clearance of spark plug | 1.5mm |
| Internal Combustion Rock Drill Packing list | ||
| Serial No. | Designation | Quantity |
| A. Machine & Technical document with machine | ||
| 1 | Internal Combustion Rock Drill | 1 Unit |
| 2 | Service manual | 1 pc |
| 3 | Certificate | 1 pc |
| 4 | Packing list | 1 pc |
| B. Spare Parts attached the machine | ||
| 1 | Hexagonal seal ring | 2 pcs |
| 2 | O-ring 92*2.6 | 1 pc |
| 3 | Olive spring | 6 pcs |
| 4 | Needle | 6 pcs |
| 5 | Valve plate | 2 pcs |
| 6 | Conical spring | 2 pcs |
| 7 | Cylinder pad | 1 pc |
| 8 | Spark plug | 1 pc |
| 9 | Paper pad for Contrl Part | 1 pc |
| 10 | Upper ring of hammer piston | 2 pc |
| 11 | Lower ring of hammer pistpon | 1 pc |
| 12 | Lower ring for engine pistpon | 2 pcs |
| 13 | Upper ring for engine piston | 1 pc |
| 14 | Fuel pipe | 1 pc |
| 15 | O-ring 30*3.1 | 1 pc |
| 16 | Controller | 1 pc |
| 17 | Ignition Coil | 1 pc |
| 18 | Starter wire rope | 1 pcs |
| 19 | Check valve plate | 2 pcs |
| 20 | Pad for Check valve plate | 2 pc |
| 21 | Paper pad for Magneto bed plate | 1 pcs |
| 22 | Paper pad for Drill chuck cover | 2 pc |
| 23 | Drill rod 0.6m | 1 pc |
| 24 | Drill bit ø32 | 1 pc |
| C. Accessory tools | ||
| 1 | Inner hexagonal wrench S=6 | 1 pc |
| 2 | Spark plug socket wrench S=21 | 1 pc |
| 3 | Tool bag | 1 pc |
| 4 | Needle for poking the air way | 1 pc |
| 5 | Funnel | 1 pc |
| 6 | Double off-set ring spanner S=22*19 | 1 pc |
| 7 | Double head wrench S=10*13 | 1 pc |
| 8 | Sleeve wrench S=13 | 1 pc |
| 9 | Screw driver 75 | 1 pc |
| 10 | "T" Wrench S=8*10*12 | 1 pc |
| 11 | Slider bar of socket wrench | 1 pc |
| D. Packing Boxes | ||
| 1 | Packing Boxes | 1 pc |
