Home Companies Shanghai I Fluid Technology Co., Ltd.

8 Inch Turbine Irrigation Hydrometer Positive Displacement ISO 4064 Cast Iron

Active Member

Contact Us

[China]

Address: Room 811-Building 143, No. 1399 Husong Road, Shanghai, China

Contact name:Yuan

Shanghai I Fluid Technology Co., Ltd.

8 Inch Turbine Irrigation Hydrometer Positive Displacement ISO 4064 Cast Iron

Country/Region	china
City & Province	shanghai shanghai
Categories	Pumps

Product Details

Turbine water meter with positive displacement mechanism Cast Iron for irrigation hydrometer

The Turbine Water Meters are used for applications, where flows are moderate to high, but occasionally low. For example, the measurement of potable cold or hot water in commercial and industrial services. The flow shall be in one direction.

Operation:

The rotor turns proportionately to the volume of water flowing through the meter by water flowing through the turbine section. A magnetic drive transmits the motion of rotor to a driven magnet located under the hermetically sealed reading register. To a gear train, the magnetic is connected, which translates the rotations into totalized volume and displayed on the dial register. Only moving parts are the rotor assembly and vertical shaft.

Features

The vertical helix design, easily maintenance.
Magnetic driven, dry dial, clear reading
Full flow measuremeng
Wide measure range, Q3 is up to 250 m3/h
Initial flow Q3 is down 0.03m3/h
Technical data conform to international standard ISO 4064.

Note:

Measuring accuracy conform to ISO 4064 class B standard..
Available with different length on request. Available in hot water meter on request.

Working condition:

Water temperature:0.1℃～40℃( 0.1℃～90℃ for hot water meter)
Water pressure: ≤1.0Mpa

Maximum Permissible Error:

(1) in the lower zone from qmin inclusive up to but excluding qt is ±5%

(2) in the upper zone from qt inclusive up to and including qs is ±2%

(3) Hot water meter ±3%

Data sheet

Model	Dia (mm)	Class ISO4064	Overload flow (Qs)	Permanent flow (Qp)	Transitional flow (Qt)	Min flow Qmin	Min reading	Max reading
		m3/h					M3
IXLC-50	50	A	30	15	4.5	1.2	0.0002	999,999
		B			3.0	0.45
IXLC-65	65	A	50	25	7.5	2.0	0.0002	999,999
		B			5.0	0.75
IXLC-80	80	A	80	40	12	3.2	0.0002	999,999
		B			8.0	1.2
IXLC-100	100	A	120	60	18	4.8	0.0002	999,999
		B			12	1.8
IXLC-125	125	A	200	100	30	8	0.0002	999,999
		B			20	3
IXLC-150	150	A	300	150	45	12	0.0002	999,999
		B			30	4.5
IXLC-200	200	A	500	250	75	20	0.0002	999,999
		B			50	7.5
IXLC-250	250	A	800	400	120	32	0.0002	999,999
IXLC-300	300	A	1200	600	180	48	0.0002	999,999

Dimension (LXLC)

Model	Dia.	L	H	Flange (mm)
Model	(mm)			D1 (OD)	D2 (hole)	Bolt(n-M)
IXLC-50	50	200	253	165	125	4-M16
IXLC-65	65	200	268	185	145	4-M16
IXLC-80	80	225	284	200	160	8-M16
IXLC-100	100	250	295	220	180	8-M16
IXLC-125	125	250	310	250	210	8-M16
IXLC-150	150	300	339	285	240	8-M20
IXLC-200	200	350	382	340	295	8-M20(1.0Mpa) 12-M20(1.6Mpa)
IXLC-250	250	400	433	395	350	12-M20(1.0Mpa)
IXLC-250	250	450	438	405	355	12-M24(1.6Mpa)
IXLC-300	300	450	483	445	400	12-M20(1.0Mpa)
IXLC-300	300	500	488	460	410	12-M24(1.6Mpa)