Home Companies Xinxiang Techang Vibration Machinery Co.,Ltd.

Electromagnetic Shaker Feeder Stone And Garbage Transportation Use

Active Member

Contact Us

[China]

Address: No.60, Sizhuangding Industrial Park, Xinxiang City, Henan Province, China.

Contact name:Jean Wang

Xinxiang Techang Vibration Machinery Co.,Ltd.

Electromagnetic Shaker Feeder Stone And Garbage Transportation Use

Country/Region	china
City & Province	xinxiang henan

Product Details

Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage

Introduction

Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage is widely used in various industries such as light industry, chemical industry, grain, food, grinding, etc. It is used in the process of feeding, batching and quantitative automatic packaging of powder and granular materials, and can realize centralized control and automatic control in the production process.

Product Description

1. Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage is a new type of feeding equipment , using electromagnetic exciter as the vibration source to drive hopper trough work. It features smooth vibrating, reliable operation, long service life and being suitable for feeding.

2. Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage is the machine which can orient and feed small parts to the assembly line by vibration.

characteristics

1. The utility model has the advantages of small size, light weight, simple structure, convenient installation and low operating cost.
2. The use of half wave rectifier control, can be used in the stepless adjustment.
3. The feeder in the course of continuous feeding thrown the parts up, so to wear small trough.
4. In order to reduce the noise and improve life and feed efficiency, the inside of the bowl is usually coated by urethane.
The vibrators are controlled by control boxes.

Use and installation

1. In order to ensure the normal operation of feeder,Should pay attention to several points in the installation of hopper.
2. The outlet and the feed tank should have 5mm gap,Ensure the hopperis not affected by the process of feeding.
Chute exit should design oblique,To avoid the vertical pressure direct pressure on the feeder,Otherwise it will seriously affect the efficiency of feeder.
3. The size of the opening of the hopper shall be guaranteed to obtain sufficient material,In order to adjust the number of materials should be set gate.
4. Vibrating feeder for seat type structure,Install flat on the support plate.

Working Principle

Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage adopts linear trough reciprocating type, which is composed of trough, electromagnetic vibrator and shock absorber. It can screen materials without orientation. Its electrical control uses a half-wave rectification circuit, which is completely equipped with no rotating parts and feeding on the principle of micro-throw motion. The feeding process is completely automatic, the trough wear is small, the mechanical maintenance is convenient, and the material with high temperature wear and corrosiveness can be transported at the same time. The control box allows manual and automatic adjustment.

Advantage

1. Small size, light weight, simple structure, convenient installation, no rotating parts so no need lubrication, convenient maintenance and low operating cost.
2. Due to Electromagnetic vibrating feeder uses the resonance principle of mechanical vibration, the double mass works in a low critical resonance state, thus consuming less electric energy.
3. Since the current can be instantaneously changed, opened and closed, so the feeding amount has a high precision.
4. The control equipment of this series of electro-vibration machines can easily adjust the feeding amount during use, and can realize centralized control and automatic control of the production process.
5. Since the material in the feed tank is continuously thrown up during the feeding process and jumps forward according to the trajectory of the parabola, the wear of the feed tank is small.
6. This series of vibrating machines is not suitable for applications with explosion-proof requirements.

Main Features

Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage is a new type of feeding equipment, which has the following characteristics compared with other feeding equipment:
1. small size, light weight, simple structure, easy installation and low operating cost;
2. Due to the mechanical vibration resonance principle, the power consumption is small;
3. Using thyristor half-wave rectification power supply, the feed amount can be adjusted steplessly during use;
4. The feeder continuously throws the material during the feeding process, so the wear of the feed tank is small.

Model Selection

Model	GZV 1	GZV 2	GZV 3	GZV 4	GZV 5	GZV 6
Capacity(t/h)	0.1	0.5	1	2	4	6
Double Amplitude	1.5	1.5	1.5	1.5	1.5	1.5
Frequency(r/m)	3000	3000	3000	3000	3000	3000
Power(W)	5	8	20	25	30	50
Weight(kg)	4	7	12	18	27	45
Voltage(V)	220	220	220	220	220	220

Application

Vibrating Feeders Electromagnetic Feeder to Transport Stone and Garbage are widely used in mining, metallurgy, coal, building materials, light industry, chemical industry, machinery industry and agriculture. It is also suitable for automated batching and quantitative packaging and production process automation systems.