Customized Ultrasonic Flexo Wash Anilox Cleaner For Ceramic Roller With Motor

Custom Made Ultrasonic Anilox Cleaning Machine for Ceramic Roller

Features:

• Ultrasonic cleaning for cylinders is a modern and advanced cleaning technology. Its mechanism is the usage of a transducer to convert electrical signals into mechanical vibrations into the cleaning solution. When ultrasonic travels in liquids, cleaning fluid is compressed and expanded, and produce a few mechanical, mechanical force against a work, which will clean the printing rollers.
• As we all know, Anilox roll of flexo printing machine, laminating machine, offset printing machine Polish is part of the main. It directly depends on the quality of printing, laminating or varnishing. Because the roller parts not only plays a role of the ink roller, also plays an ink roller role, and even plays a role of rollers. It is used in the process, long pass from ink, ink or varnish which are more or less there are some impurities, these impurities after once inside the roller of a mesh, it will jam the ink roller, resulting in sharp decline in quality of printing or composite. In this case, you need to mesh with the ultrasonic cleaner the impurities earthquake, restores the ink roller effect. In addition, regular cleaning of Anilox roll will help better protect roller, extending the service life of the roller, plays the best print/composite effect.

Function and advantages:

• Choose water based with some additives used as cleaning agents,Low cost, excellent cleaning effect,the best and most affordable cleaning equipment;
• All imports of thick stainless steel acid, attractive and durable;
• Adjustable thermostatic system ;
• Split structure, easy to maintain, durable
• Washing machine tank with imported high quality stainless steel;
• Flat lid of the washing machine, the shell is made of high quality stainless steel.

Main introduction of anilox roller ultrasonic cleaning machine:

After long time printing, Mesh blockage is likely to result in ink, paint, glue and other dirt coating, in this case, if the mesh cannot be cleaned thoroughly, the printing effect will be effected, printing cannot work normally, anilox roller ultrasonic cleaning machine can do perfect cleaning by ultrasonic cavitation, which can cause jetting force from tiny bubbles in exploding, the contamination will be removed totally, after several minutes cleaning, the anilox roller can come back to its origin, the ultrasonic intensity is visible under controlling, the anilox roller can spin in sitting the tank top, which can avoid axis of anilox roller immersion during cleaning, the spinning force also can fall off the dirty easily in driving, AG SONIC design rubber roller at two sides to drive the anilox roller in spinning as couples, which is separately controlled, is easier in operation, maintenance.

The cleaning method of anilox roller ultrasonic cleaning machine:

Coat the concentrated detergent on the surface of anilox roller according to the clogging degree

After several hours, put the anilox roller into the ultrasonic cleaning tank

At last, rinsing the anilox roller by cleaned water

Or put the detergent into the cleaning tank directly, its ratio depends on the clogging degree,

Ultrasonic have perfect cleaning effect, which can keep the anilox roller as clean as its new, AG SONIC can make to order, pls provide the diameter of your anilox roller and its anix. Also the max length of it to make a customized service

Wide application:

Transducers installed in the bottom: