Active Member
|
[China]
Address: Room 103,3#Block,No.3 Xiaolong Road,Yuanshanbei Village,Changping Town,Dongguan City.China
Contact name:Aiden Zeng
Dongguan YiCun Intelligent Equipment Co.,Ltd |
|
|
100KG Test Load Transport Simulation Vibration Testing Machine
The simulated transport vibration table is mainly used to simulate the collision of goods and articles produced by the product in the car trunk when the vehicle encounters different road conditions such as bumps, up-hills, down-hills, corners, etc. Collision, extrusion of items and articles may cause damage to the product, thereby further improving the quality of the articles and the quality of the packaging of the articles, and giving the basis for the evaluation or confirmation of the packaging of the articles and articles.
Application
Mattress Testing Machine
Chair Testing Machine
Desk and Table Testing Mmachine
Luggage And Suitcase Testing Machine
Foam Testing Machine
Meet Standard
ASTM F1566
ANSI/BIFMA X5.1
EN 1728
BS EN 1957
QB/T 1952.2
ASTM D3574
EN1335-3
ISO 2248
JIS Z0202
ISTA
Other
| Model | MZD-100 |
| Maximum test load (kg) | 100kg |
| Frequency range | 100 ~ 300rpm |
| Amplitude range (mm) | 25.4mm |
| Vibration mode | reciprocating (commonly known as horse racing) |
| Work surface sizeL × W (cm) | 100 × 120 |
| Body table | SUS#304 stainless steel |
| Outer box part | Electrolytic board outside baking anti-static powder paint baking table fixture aluminum alloy |
| Time setting | 0seconds,99hour hours |
| Start time setting | 0-15seconds |
| Speed control mode | frequency control (frequency motor low noise 60 decibel long service life) |
| Power supply voltage (V/HZ) | AC 1 ∮220/50Hz |
| Power consumption (KVA) | 0.75 |
| Machine weight (kg): 150 | 150 |
| Environmental conditions | Temperature Temperature 5 ~ 40 ° C; Humidity ≤ 85% RH |
| Aplicable Standards | EN, ANSI, UL, ASTM, ISTA, GB/T4857.7-2005 and other domestic or international transportation standards. |
| Item | Part name | Brand name | Product specifications | Place of origin |
| 1 | Frequency conversion motor + inverter | Shilin | 0.75 set | Domestic |
| 2 | Timer | Omron | JS88-BCS | Nissan |
| 3 | Tachometer | Division | One | Dongguan |
| 4 | switch | Shanghai Marco | 12V one | Shanghai |
| 5 | Relay + base | Omron | one of each | Nissan |
| 6 | Stop button switch | Shanghai Marco | Red one | Shanghai |
| 7 | switch | Shanghai Marco | One | Shanghai |
| 8 | Gray control box | Division | Anti-static powder paint | Dongguan |
| 9 | Plum handle | Domestic brand | 8 | Foshan |
| 11 | Aluminum trough | Domestic brand | 1.2M*2,1M*2 | Shanghai |
| 12 | Chassis sheet metal | National standard | 8 pieces | Domestic |
| 13 | Belt | Hutian | 750*2,900*2 | |
| 14 | Shockproof mat | Hongli | 4 | Shenzhen |
| 15 | Open end wrench | Dongcheng | 12×14 one | Jiangsu |
| 16 | Bearing | TSR | 8 in total | Dongguan |
| 17 | Countertop 304 stainless steel plate | National standard | piece | Domestic |
| 18 | Start button switch | Shanghai Marco | Green one | Shanghai |
1). Buffer start function, work medium noise very low.
2). Digital meter shows the vibration frequency
3). Synchronization silencing belt transmission
4). Sample clamping adopts guide rail type,safe and easy to operate
5). Machine base adopts heavy channel steel with vibration damping pads
6). Easy to install, operate steadily, no need to install foot screws
