Double Side Based Cantilever Storage Racks Selective Metal Shelving With Iron Tube

Double Side Based Metal Cantilever Rack Selective Metal Shelving Cantilever Shelf With Iron Tube

1.Cantilever racking is mainly used for the storage of long stuff such as rolled section steel, steel tube, plates, wire lines and so on.
2.Upright shaft is usually made of H type steel or cold rolling steel, square tube, cold rolling steel or H type steel are used to make arms.
3.Cantilevers are assembled to upright shafts by composite type or bolts&nuts which is also for the fixation between base and uprights.
4.Level height is adjustable.
5.Loading and unloading of goods can be done manually or by forklifts.
6.The height of cantilever racking is usually lower than 2500mm (the height up to 6000mm by using forklifts for loading); length of arm is shorter than 1500mm, and loading capacity is no more than 500kg per arm.
7.Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials.
Cantilever industrial hose storage:
Cantilever Racking&Cantilever rack is the ideal solution to store long and awkward oversized goods with direct accessibility. It is available in both single sided and double sided configurations.
Pipe storage system Advantage:
1. Easier to use
With no front column in the way, faster to load and unload, lowering handling time and costs.
2. More flexible
Loads may be placed anywhere along the entire length of a row on a cantilever rack.
3. More compact
The lack of a front column saves horizontal space and provides more abundant handling clearance.
4. More selective
Any load or storage slot is immediately accessible.
5. More economical
Both reduced handling time and increased space utilization make cantilever racks more cost-efficient. And increase load length increases.
6. More adaptable

Cantilever racks can store nearly any type of load long, bulky, or oddly-shaped.
Column Section:
305x96x3.0 mm (Standard Duty)
350x96x4.0 mm (Heavy Duty)
410x96x4.5 mm (Extra Heavy Duty)
Height: 3000-4000-4877-5000-6000-7000-8000-9000 mm( Any size can be accepted.)
Arm Length: 800-900-1000-1200-1300-1400-1500-1600-1700-1800 mm( Any size can be accepted.)
Required information for quick quotation:
1) The Auto CAD drawing or draft drawing of the warehouse and mezzanine.
2) The size of the warehouse?
3) How many layers?
4) The size of shelving?
5) The loading capacity of each layer?
6) The loading capacity of each square meter of the floor?
7) The RAL color?