Active Member
|
[China]
Address: Room 703, Land Center T2, YanZhan Road, No.1111, QuJiang New District, Xi'an China
Contact name:Rachel Zhang
Xi'an Longjoy Foreign Trade Co.,Ltd |
|
|
High pressure elbow is a kind of pipe fitting used for turning at different angles at the turning of high-pressure pipeline. Among all the pipe fittings used in high-pressure pipeline system, the proportion is the largest, about 80%.
High pressure elbow. It is thicker than the wall thickness of ordinary elbow, or the high-pressure strength of the material is higher than that of ordinary elbow.
Size: 1/2" - 80"
Working pressure: 0-1.0Mpa
Wall thickness: Sch5-Sch160 XXS
Material: Carbon steel, alloy steel and stainless steel
Standard: ANSI, ASME API5L, OCT, DIN and JIS, etc
ASME b16.9 ASTM a234 wpb 3000LBS 45 Degree High pressure elbow technical data sheet as below:
| Size | D | L | T | T1 |
| 19 | 19 | 28 | 1.25 | 1.5 |
| 25 | 25 | 33.5 | 1.25 | 1.5 |
| 32 | 32 | 41 | 1.25 | 1.5 |
| 38 | 38 | 48.5 | 1.25 | 1.5 |
| 45 | 45 | 56 | 1.5 | 2 |
| 51 | 51 | 60.5 | 1.5 | 1.65 |
| 57 | 57 | 65 | 1.5 | 2 |
| 63.5 | 63.5 | 65 | 1.5 | 2 |
| 76 | 76 | 77.5 | 1.65 | 2 |
| 89 | 89 | 89 | 2 | 2 |
| 102 | 102 | 102.5 | 1.65 | 2 |
| 108 | 108 | 107.5 | 2 | 2 |
High pressure elbow is to weld a polygonal ring shell with polygonal cross section or a polygonal sector shell with closed ends.
After the pressure medium is filled inside, internal pressure is applied. Under the action of internal pressure, the cross section gradually changes from polygon to circle, and finally becomes a circular ring shell.
As required, a circular ring shell can be cut into 4 90 elbows or 6 60 high-pressure elbows or high-pressure elbows of other specifications.
High pressure elbows are generally suitable for pipeline series in petroleum, natural gas, aerospace, shipbuilding, chemical industry, hydropower, fire protection, construction, boiler and other industries.
