Durable Aluminum Sheet Diamond Expanded Wire Mesh
Product Description
Aluminum Expanded Metal Roof Cladding Panels
Framed expanded metal lath cladding panels to roof areas.
a) Panels shall comprise expanded aluminium metal lath sheets fixed
inside extruded metal framing.
b) Size and configuration of panels shall be as indicated on the
Design Drawings. Note that various size and shape panels are used
for the roof. Panels shall be arranged in a staggered pattern.
c) Where there is not sufficient depth for mesh panels, these shall
be substituted for stainless steel blanking panels where indicated
on the Design Drawings.
d) Frames shall be ‘T’ profile, with expanded aluminium metal lath
sheets fixed inside so that top edge of frame is exposed. This top
edge shall be finished flush with the top of the sheet.
e) Panels shall be fixed to secondary steelwork supporting
structure using a concealed bracket system as indicated on the
Design Drawings. Fixings shall allow panels to be individually
removed for cleaning, maintenance and replacement as required.
f) System shall include all secondary steelwork as required.
g) Roof areas shall be designed to accommodate platform and walkway
floor loads in accordance with BS 5395.
h) Joints: Minimal open joints as indicated on the Design Drawings.
Advise the Client’s
Representative if larger joints are required to accommodate thermal
expansion.
i) Finish: Natural anodised. Panels shall be fully fabricated prior
to anodising. No cutting or drilling shall be allowed following
anodising. Refer to Section Z33.
j) Thickness: Expanded metal lath panels shall be 5mm thick.
Contractor shall confirm
| Material | Stainless steel,thin low carbon steel,brass plate, Aluminum plate and so on |
| Hole Shape | Diamond,square hole,scale hole,gothic etc. |
| Mesh size | 1220*2440mm,1200*2400mm,1000*2000mm or customized |
| Thickness | 0.3-10.0mm |
| Surface treatment | Galvanized,PVC coated |
Expanded Metal Aluminum specification
- Materials: 3003 aluminum, 5005 aluminum, 5052 aluminum, etc.
- Expanded metal thickness: 0.3mm-20mm
- Expanded metal panels siezes: 1/2,3/4,1'× 2',1' × 4',2' × 2',2'
×4',4' × 4',4' × 8',5' × 10',or made to size.
- Surface treatment: anodized, powder coated, PVC coated, etc.
Auminum expanded metal features
- Aluminum expanded metal grating has good corrosion resistance and
rust resistance, but it is cheaper than stainless steel mesh and is
a more economical choice.
- It is not easily bent, and suitable for security mesh applications.
- Lightweight – This is the most important feature of aluminum mesh
panels.
- Decorative properties for ceiling or room dividers.
product Advantage
| 1 | Heat insulation |
| 2 | Easy installation |
| 3 | Low maintenance cost |
| 4 | Long life |
| 5 | Upgrade the building |
| 6 | control becteria1.Provide customized services |
