Q345R Carbon Steel 1500 Kghr Lpg Fuel Industrial Steam Boiler For Hot Press Machine

Q345R Carbon Steel 1500 Kghr Lpg Fuel Industrial Steam Boiler For Hot Press Machine

Industrial Steam Boiler is package type full automatic horizontal three pass fire tube wet back structure boiler. Industrial Steam Boiler can produce hot water, saturated steam or superheated steam. Industrial Steam Boiler is adaptable for wide ranges of fuels such as natural gas, LPG, biogas, methane gas, diesel heavy oil etc. Industrial Steam Boiler has a large corrugated furnace which have big radiate heating area and we adopted threaded smoke tube which greatly increased the boiler heat transfer efficiency. Industrial Steam Boiler burners and valve groups are world famous brand from Italy and German, quality is stable and reliable.

Industrial Steam Boiler Quick details:

Industrial Steam Boiler  Fetures:

1. Safe and Intelligent Control

equipped with world famous brand burners(Baltur, Riello, Oilon), 80% configuration , making the combustion more sufficient with lower failure rate.
multiple protective functions for over-high temperature, over-high pressure, water shortage, leakage detection and flame-out, ensuring safe and reliable operation.
Independently developed PLC control panel, better match our boiler operation. Siemens PLC with 10 inch touch screen and frequency transformer, more safety and easy operation.
Explosion proof door design, prevent explosion, reduce the damage to the boiler, improve the safety of boiler.

2. High efficiency and low fuel consumption

Adopt threaded smoke tube, Increase the flow rate of the flue gas, enhance the heat transfer efficient.
Equipped with dual energy-saving devices, fuel combustion is sufficient, exhaust gas temperature is low, thermal efficiency is increased by 5%-10%
big size corrugated furnace, has large heating area, satisfy the free expansion of boiler, improve the boiler efficiency.

3. Eco-friendly and Low NOx emissio

Low nitrogen FGR combustion technology Nitrogen oxide emissions <30mg/m3;

Industrial Steam Boiler​ technical parameter

Industrial Steam Boiler Economizer

1. Heat feeding water from 20℃ to 70 ℃ by using exausted gas
2. Reduce exhaust temperature

20ton steam boiler gas consuption about 1400 M3/hr
If to equip with 2 levels saving fuel device, its efficiency
up to 99.8% and will save gas at least 120 M3/hr

Aluminium-steel Fins with high conductivity coefficient.
ND steel sheel to prevent the corrosion of sulfur
Aluminium Silicate insulation, release heating loss, reduce economizer outer cover temperature.
Large size heating area, adequate heating exchange area, greatly make use of heat energy of exhausted gas to heat feed water, increase boiler efficiency;

Industrial Steam Boiler project case:

Safety System each part of Industrial Steam Boiler​ is designed based on the safety.
1.Independently developed PLC control panel, better match our boiler operation. Siemens PLC with 10 inch touch screen and frequency transformer, more safety and easy operation.
Safety control system:
1)Control the feed pump, burner, water level sensor and pressure controller
2) Control the water feeding:
Automatic Alarm when the water level is high or low, safety interlock when the water level is over-high or over-low. When the water level is low, the boiler system will feed water automatically, when the water level is high, the boiler will stop feeding water. When the water level lower than 0 or over-high, the boiler burner flame out.
3)Pressure control
Safety interlock for over-high pressure.
4)Control the smoke temperature, when the smoke temperature is over-high, it will control the boiler alarm firstly and then the burner flame out, the boiler shutdown.
5)The burner can switch over from large fire to small fire, control the burner start and off automatically.
6) remote control system
2.Double safety valve, double water level gauge, double pressure gauge design, backup security, safe and reliable.
3. All steel materials, boiler pipe, boiler drum steel plate according to state standard and from national standard manufacturer, ensure the high material quality.
4.Strict quality control
1)100% NDT nondestructive testing inspection for welding.
2)The boiler needs to be do the hydraulic text before leaving the factory, and it should be under the supervision of relevant government departments.

Supervision of Installation and Commissioning Service
Supervision of installation and commissioning the equipment within delivery scope is available byour service team. But the Buyer will be only in charge of:
1.The round air-tickets costs from Zhengzhou city to project site.
2.Board and lodging of seller’s workers for the entire period at the end-user’s site.
3.Necessary communication cost.
4.Service fee of Seller’s worker: USD 100/day/person, for the entire period at the end-user’s site. This quotation excludes all consumables during erection, commission and trail run, like instrument, common tools, installation auxiliaries and oil etc.