Panasonic Industrial Servo Drives MCDLN35NE SERVO DRIVE A6N 200V 750W 22A

Panasonic Industrial Servo Drives MCDLN35NE SERVO DRIVE A6N 200V 750W 22A

Detailed Product Description

Spec Detail

Quick Detail

• Input power: Main circuit Single/3-phase 200 to 240V +10% -15% 50/60 Hz
• Input power: Control circuit Single phase 200 to 240V +10% -15% 50/60 Hz
• Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
• About Encoder feedback * When using it as an incremental system (not using multiturn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings).
• Parallel I/O connector:
• Control signal Input Each 8 input can be assigned by the parameter.
• Parallel I/O connector:
• Control signal Output Each 3 input can be assigned by the parameter.
• Parallel I/O connector:
• Analog signal Output 2 outputs (Analog monitor: 2 output)
• Parallel I/O connector:
• Pulse signal Output Line driver output for encoder pulses (A/B phase signal).
• Communication function RTEX, USB
• Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
• Communication function: RTEX Communication for transmission of a real-time operation command, the parameter setting, or the status monitoring.
• Regeneration Built-in regenerative resistor (external resistor is also enabled.)
• Control mode Semi-closed control
• Position control: Profile position control [PP], Cyclic position control [CP]
• Velocity control: Cyclic velocity control [CV]
• Torque control: Cyclic torque control [CT]
•  
• * Switch PP/CP/CV/CT mode according to the RTEX communication command.