Wan Beardsley Compressor (Shanghai) Co., Ltd |
|
Powerful 2 Stage Air Compressor / Stainless Steel Air Compressor Oil Type
1. High quality of airend
2. Highly efficiency and energysaving screw airend
The air end is connected with big rotator and is designed with low rotat-ing speed, and it contains two independent compression units. It is featured by high efficiency, low noise, low vibration, high reliability, low compression ratio in each stage, smaller leakage and high volume efficiency. Under the same power, two heads bear load while bearings bear small load with longer service life.
3. Highly efficient and energy-saving permanent magnetic motor
The airend is highly efficient and energy-saving permanent magnetic motor with protection level of IP55 which is elaborately selected according to requirement of application of air compressor, it reaches national grade-1 energy efficiency standard, both torque and load can meet special design standard so as to achieve optimization of motor efficiency and power factors under loading conditions. This optimized coefficient has about 5%-8% advantages when compared with efficiency of other motors.
4. Highly efficient and energy-saving filter system
Highly efficient oil-gas separator with special simplified design, aggregated separator core and oil return device, its service life is 6,000h. Oil filter is of low-pressure design with service life reaching as long as 4,OOOh, and high filtering precision protects bearing and screw rotator.
Air filter doesn’ t need to change air flow direction when doing filtering, instead, it directly runs through filtering medium, this reducing pressure loss, it is more energy-saving than traditional air filter with large filtering area, higher compactness and longer service life.
5. Highly efficient cooling system
It adopts highly efficient fin-type cooler with large heat exchange area, surplus of heat exchange being 30% and more optimal cooling effect, and it can normally operate under environmental temperature 45°C.
6. Energy-saving air inlet control system
New-type integrated inlet valve of professional design with large range of air inlet adjustment . It has valve regulation with small pressure loss, stable movement and long service life. Key part of inlet valve—magnetic valve uses internationally famous brand, which guarantees absolute operating safety and
Permanent magnet frequency characteristics
1. 24-hour warning sending of the system
The warning systems of maintenance and breakdown are triggered as soon as maintenances are needed or breakdowns happen.then the equipment management members and the mainrenance members of the distributors will be informed at the soonest time through the way of message or email,through which,both the secondary loss and the major breakdowns of the machinery can be avoided.
2. The easy and quick operation method
The operation mode of ueasy managemenf with a touch screen makes it easy and quick to revise parameters.Meanwhile.in order to turn the intelligent network control to be reality,intelligent power-on and power-off or pressure setting within certain periods can be set.
3. A real time check on the operational parameters and breakdown warnings of the machines can be achieved through the remote monitoring system.
4. The breakdowns under moving cirumstances can be dealt with timely and quickly.
5. Based on being human-oriented and taking services as the top priority,the APP terminal systems can provide convenient and efficient control and use conditions and then provide safe,reliable and considerate services to pepole through firstly performing a good management at anywhere and anytime.
Energy saving Mute environmental
1. The big data information-based management system
Master all kinds of information,use information,have a trial use of the information as well as find out the problems and breakdowns etc. at anywhere and anytime,and them provide the most valuable.timely and improrant information and finally improve various effciencies.
2. Save as much as 50% electricity
When the demand for air changes drainatically, the average energy saving rate is over 50%. There is no waster of idling and unloading, no peak start current, so that reduce the energy consumption of air compressor.
protection Subversion tradition Lead the future
Two-stage energy-saving screw compressor-technical parameters
Model | Power (KW) | Capacity/Pressure ( m3/mpa) |
Outlet size | Weight (kg) | Unit size mm (LxWxH) |
WZS-150AZII WZS-150PM-2S | 110 | 28m3/0.5mpa | D_ | 3200 | 2650x1650x1900 |
23m3/0.8mpa | |||||
18.5m3/1.0mpa | |||||
15m3/1.25mpa | |||||
WZS-180AZII WZS-180PM-2S | 132 | 32.5m3/0.5mpa | DN80 | 3500 | 2650x1650x1900 |
28m3/0.8mpa | |||||
23m3/1.0mpa | |||||
18m3/1.25mpa | |||||
WZS-220AZ11 WZS-220PM-2S | 160 | 41m3/0.5mpa | DN125 | 4100 | 3200x1750x2350 |
32.6m3/0.8mpa | |||||
27m3/1.0mpa | |||||
2Bm3/1.25mpa | |||||
WZS-250AZII WZS-250PM-2S | 185 | 45 m 3/0.5m pa | DN125 | 4500 | 3200x1750x2350 |
38m3/0.8mpa | |||||
41m3/1.0mpa | |||||
26m3/1.25mpa | |||||
WZS-270AZ11 WZS-270PM-2S | 200 | 50m3/0.5mpa | DN150 | 5100 | 3200x1750x2350 |
46m3/0.8mpa | |||||
38.5m3/L0mpa | |||||
32m3/1.25mpa | |||||
WZS-300AZ11 WZS-300PM-2S | 220 | 54m3/0.5mpa | DN150 | 6200 | 3880x2250x2350 |
50m3/0.8mpa | |||||
41.5m3/1.0mpa | |||||
40m3/1.25mpa |
Company profile:
Wan Beardsley Compression Machine (Shanghai) Co., Ltd is a medium and large-sized enterprise specialized in research, development and production of air compressors. By virtue of fruitful technological strength and advanced and complete production and testing equipments, this company pursues enterprise tenet “Achieve high quality with conscientiousness and create a centennial brand with quality”, strictly performs the commitment “be the most energy-efficient screw air compressor”, continuously seeks for sustainable improvement of products, process and system, and increasingly improves product properties, quality and reliability so as to make out R & D and manufacturing capacity step onto a new stair in manufacturing technology of air compressor. Our product quality has reached internally first-class level, and some products have been exported to and supported Southeast Asia and European and American markets.
FAQ:
1. Before quoting, what should users offer?
1). Discharge pressure (Bar, Mpa or Psi)
2). Air discharge/Air flow/Air capacity (m3/min or CFM)
3). Power supply (220/380V, 50/60Hz, 3Phase)
2. If I don't know the pressure and air flow, what should I do?
1). Take the picture of nameplate, we will advise the suitable air
compressor to you.
2).T ell us what industry you are, we can advise the suitable one
(so as to air tank / air dryer / air filters).