Customed Silicone Heater Pad , Waterproof Non-Toxic Silicone Mug
With High Quality
Description of heating pad element silicon rubber heater
Silicon rubber heater is a kind of thin film which heats upon
electrified, in a standard thickness of 1.5mm, Adopting nickel
chrome wires or 0.05 mm~0.10mm thick nickel chrome foils etched to
some certain shapes, the heating component is wrapped with heat
conducting and insulating materials on both sides, and completed in
high-temperature die forming and aging heat treatment. Due to its
high reliability, the product is highly competitive when comparing
with other electric heating film products which normally have paste
materials such as graphite paste or resistor paste, etc. coated on
insulation materials. As a kind of soft red film which can be
applied closely on different curved surfaces, the silastic heater
can be fabricated in varies shapes and powers.
1. Fast heating with a coefficient of heat conductivity of only
1W/m.k. Due to its small thermal capacity, prompt turn on/off can
be achieved.
2. High thermal efficiency: The temperature of electric heating
film itself is only tens of centidegrees higher than that of the
liquid when heating, which is 2-3 times energy saving than ordinary
electric stoves.
3. Water, acid and alkali resistance, high-strength of electric
insulation.
4. High mechanical strength with 100kg/cm² mechanical pressure.
5. Small size: Small space occupied when applying this heating
product.
6. Easy application: Its self-insulation and free-of-open-fire
property greatly help simplify the techniques of heat preservation
and thermal insulation.
7. Its wide range of temperature,-60°C~250°C, can not be simply
achieved by other electrical appliances.
8. Long service time: Under normal use, the product almost can be
permanently and continuously used because nickel and chrome
materials are durable to any corrosion, and the silastic has a high
surface resistance up to 100kg/cm², which is uncomparable for any
other electric heaters.
9. Made in any size, the temperature of the product can be
precisely adjusted by temperature controller.
Technical parameters:
Specification:
Material | Silicone + Wire |
Voltage | 220-240V |
Cable | 4Cores, 0.5m length |
Power | 350W |
Electric thermostat | K, NTC, PT100 Sonde |
Uniform heating to 220 degree C
Easy to install
Heater width to 48 inches(1.2 m)
Mount to flat or curved surfaces