|
[China]
Trade Verify
Address: 45 Hualian Golden Street, Sanhe Hebei China
Contact name:Shiguo Han
SANHE 3A RUBBER & PLASTIC CO., LTD. |
|
Verified Suppliers
|
|
|
PU Gr Coupling, GS Rubber Coupling, KTR Rubber Coupling With High Quality
The polyurethane coupling, rubber coupling are made by injection
with high quality TPU material or mould CSM/SBR. It is designing
and special for all kinds of metal shaft coupling with very good
performance of high tensile strength, high wear resistant, high
elastic resilience, water resistant, oil resistant and excellent
fatigue resilience, high impact resistant etc. We have full sets
injection moulds and supply full range of GR, GS, MT, ML, MH, Hb,
HRC, L, T, NM and Gear J series couplings etc. with high quality
and excellent experience. Apply to all kinds of industrial metal
shaft coupling.
Material
Material: TPU
Hardness: Yellow: 92 Shore A
Red: 98 Shore A
Green: 64 Shore D
Standard: KTR, Germany
Size | Material | OD | ID | H | H1 | Lemella qty |
| GR14 | Polyurethane | 30 | 10.5 | 12 | 10 | 4 |
| GR19 | Polyurethane | 40 | 18 | 14.5 | 12 | 6 |
| GR24 | Polyurethane | 54 | 26 | 15.2 | 14 | 8 |
| GR28 | Polyurethane | 65 | 30 | 19 | 15 | 8 |
| GR38 | Polyurethane | 80 | 38 | 22 | 18 | 8 |
| GR42 | Polyurethane | 95 | 46 | 24 | 20 | 8 |
| GR48 | Polyurethane | 104 | 51 | 25.5 | 21 | 8 |
| GR55 | Polyurethane | 120 | 60 | 27 | 22 | 8 |
| GR65 | Polyurethane | 135 | 68 | 32 | 26 | 8 |
| GR75 | Polyurethane | 160 | 80 | 37 | 30 | 10 |
| GR90 | Polyurethane | 199 | 100 | 42 | 34 | 10 |
| GR100 | Polyurethane | 225 | 113 | 38 | 10 | |
| GR110 | Polyurethane | 255 | 127 | 42 | 10 | |
| GR125 | Polyurethane | 290 | 147 | 46 | 10 | |
| GR140 | Polyurethane | 320 | 165 | 50 | 10 | |
| GR160 | Polyurethane | 370 | 190 | 57 | 10 | |
| GR180 | Polyurethane | 420 | 220 | 64 | 12 |
Specifications:
| material | polyester, CSM/SBR |
| color | yellow, red, purple, green, black etc. |
| surface | smooth |
| tensile strength | 12-55Mpa |
| hardness | 80-98Shore A |
| elongation | 400%-650% |
| density | 1.25g/cm3 |
| elasticity impact | >25% |
| tear strength | 35-155KN/m |
| akron abrasion loss | <0.05cm3/1.61km |
| compression set (22h*70oC) | <10% |
| working temperature | 120℃ |
| size | build molding according to the buyer's drawings |
