SANHE 3A RUBBER & PLASTIC CO., LTD. |
Verified Suppliers
|
|
PTFE SS Oil Seal , PTFE SS Oil Seal for Air Compressor Oil Seal
Product Introduction
This shaft oil seal comprises of a stainless steel casing and PTFE shaft seal liip. There are many types of the seal lip: single lip,double lips and three lips or with no lip,etc.
Characteristic
1) Low friction,power saving.
2) It can replace the traditional oil seals and can be applied in condition of lubrication shortage,high speed,high temperature,strong corrosive medium.
Application Range
Speed | 40m/s |
Pressure | 2Mpa |
Temperature | -60°C |
Medium | oil,bio oil,water,air and others |
Application
air compressor,engineer, presses.etc
Suitable medium: steam, hydrogen, natural gas, gas, oil, acid,
alkali, salt solution.
1.A good compression ratio and elasticity.
2.With plastic appropriate, after pressing can adapt to the sealing
surface and sealing surface uneven fill the gap, to ensure good
sealing performance with the temperature and pressure in the system
of alternating case.
3.With excellent corrosion resistance, not to be damaged in some
extreme medium, does not have the expansion and contraction.
4.Under the condition of high temperature softening, does not
creep; under the condition of low temperature hardening, does not
shrink.
5.Have sufficient strength, when external load conditions, not be
crushed; at high temperature, not blown out.