Home Companies Baoji Hengtong Electronics Co., LTD

BP93420-III Smart Pressure Transducer Sensor 4 - 20mA RS485 Digital Sensor

Baoji Hengtong Electronics Co., LTD

Contact Us

[China] country

Trade Verify

Address: Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China

Contact name:Merlin

Inquir Now

Baoji Hengtong Electronics Co., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

BP93420-III Smart Pressure Transducer Sensor 4 - 20mA RS485 Digital Sensor

Country/Region china
City & Province baoji Shaanxi
Categories Pressure Measuring Instruments
InquireNow

Product Details

BP93420-III Smart Pressure Transducer Sensor 4-20mA RS485 Digital Sensor


BP93420-III Pressure Transmitter

Introduction of smart pressure transmitter sensor:

 

The BP93420-III intelligent pressure transmitter is a sensor device with intelligent functions, which is used to measure the pressure of liquid or gas and convert it into the corresponding RS485, HART and other standard output signals. This type of pressure transmitter is usually equipped with advanced electronic components and processors to achieve data acquisition, signal processing, communication transmission and other functions. Smart pressure transmitters are known for their high accuracy, stability and reliability, and they facilitate remote monitoring as well as integration with other intelligent systems. They are widely used in industrial automation, intelligent manufacturing, environmental monitoring and other fields to provide users with efficient and accurate pressure measurement and data management.


Product Features of smart pressure transmitter sensor:


1. Wide measuring range, diverse pressure interface forms.

2. IP65 protection level.
3. Various output signal forms.



Applications of smart pressure transmitter sensor:


1. Suitable for measuring the pressure of non-corrosive gases and liquids in 316L stainless steel.
2. Petroleum, chemical, metallurgy, power, and hydrology
3. Pressure measurement and control in harsh outdoor industrial environments.
4. Used in hydraulic and pneumatic control systems.


 

Performance Parameters of 2088 pressure transmitter sensor
Measurement Range-100kPa…0kPa ~10kPa…100MPa
Pressure TypeGauge Pressure, Absolute Pressure, Sealed Pressure
Overload≤ 1.5 times of the rated range
Accuracy @ 25ºC±0.25% (Typical) ±0.5% (Maximum)
Repeatability≤±0.1%FS
Hysteresis≤±0.1%FS
Long-Term Stability±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum
Zero Point Temperature Drift±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa)
Full Scale Temperature Drift±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa)
Frequency Response2.4Khz
Compensation Temperature0-70ºC(≤10mpa,customizable)
Operating Temperature-20ºC~80ºC
Storage Temperature-40ºC~120ºC
Vibration10g,55Hz ~ 2kHz
Housing MaterialCast aluminum
Diaphragm Material316L
Insulation Resistance100MΩ 100VDC
Explosion-proof RatingEx db IIC T6 Gb
Protection RatingIP65
O-Ring SealFluoro rubber
Weight~1.2kg

  
Output SignalSupply VoltageOutput Type
4~20mA/  HART12~30VDC2/3/4 wire
0~10/20mA
3 wire
0/1~5V
0/1~10V
0.5~4.5V5VDC
RS485 Communication Protocol3.6~30V / Battery4 wire



 

Hengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with Display



Hengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with Display


Hengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with Display



 
Ordering tips

 

1. When selecting the product, please ensure that the tested medium is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products do not include digital display heads.
3. When ordering a transmitter with LCD or LED display head, the power supply of the transmitter should not be less than 20VDC.
4. To ensure the reliable operation of the product, you are advised to install lightning protection devices on site and ensure that the product and power supply are reliably grounded.
5. The rated operating temperature range of fluorine rubber O-ring is -20℃~ 250℃. When the operating temperature of the product is lower than -20 ° C, EPDM O-type sealing ring should be selected.
6. The default cable length is 1.5m and there are three kinds of materials to choose from. If there are no special instructions, polyethylene cable materials can be used. If you need a different cable material, please specify it in the order form.
7. In case of special requirements such as strong vibration, instantaneous impact force, strong electromagnetic or RF interference, please inform us and indicate in the order.
  

Order Guide
BP93420XXPressure Transmitter
 CodeOutline Construction
IBGeneral Pressure TransmitterIXDisplay Pressure Transmitter
IEShock-resistant Aviation Pressure TransmitterIIC/IIIIndustrial General/ Display Pressure Transmitter
IFMoisture-proof Pressure TransmitterIIE/IIIEGeneral/Display Pressure Transmitter
INAir Conditioning Dedicated Pressure Transmitter  
ICHigh-temperature Pressure Transmitter  
IQ/IQTLarge Diaphragm /High-temperature Pressure Transmitter  
 Measurement Range-100kPa…0kPa ~ 35kPa…3.5MPa
(0-X)Kpa or MPaX: Indicates the Actual Measuring Range
 CodePower Supply
D124VDC
D25VDC
D3Other
 CodeOutput Signal
S14~20mADCS50~20mADC
S21~5VDCS60~10VDC
S30~5VDCS70.5~4.5VDC
S40~10mADC  
 CodePressure Connection
J1M20×1.5
J2G1/2
J3G1/4
J47/16-20UNF
J5Other
 CodeElectrical Connection
B1Hirschmann
B2PG7 Plug
B3Sealed Cable Output
B42088 Industrial Casing
B52088 Industrial Casing with Display
B6Other
 CodePressure Type
GGauge Pressure
AAbsolute Pressure
SSealed Reference Pressure

 

 

 

Hengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with Display

 

 

 

Hengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with DisplayHengtong Digital Explosion Proof 4-20mA+Hart 2088 Pressure Transmitter Sensor with Display
FAQ:

Q1:Are you manufactrade company?

A1:We are manufactrader with more than 29 years of experience.

 

Q2:Customized Product

A2:We provide OEM and Custom-Design services.

 

Q3:Quality Quarantee

A3:Our products have a limited 12 to 18 months warranty from shipment date to the original purchaser.Hengtong will replace or repair defective products free of charge.This warranty does not apply to any units have been modified,misused,neglected.

 

Q4:Shipment&packing

A4:Products are generally shipped by international Express including UPS,FedEx,DHL and INT for freight prepaid,also can use your shipment account to collect,Standard export packing,including inspection certification.

 

Q5:Contact US

   A5:We have an active and experienced sales team to serve you on technical question and business issue.Just leave us message or click the         Online Service.



 

Hot Products

Copper Tube Silicon Pressure Sensor Gas Pressure Measurement Sensor HT12 Silicon Piezoresistive ...
HT-IQ Flush Mounted Sensor Clamp Clamp Tightly Sealed Diaphragm Pressure Transducer HT-IQ Piezoresis...
HT19F Piaphragm Silicon Pressure Sensor Cell Piezoresistive Sensor manufacture HT19F Silicon ...
HT19V Diffusion Silicon Piezoresistive Pressure Sensor 5VDC Liquid Air Level Sensor HT19V Silicon ...
HT19 Diffusion Silicon Diaphragm Pressure Sensor 316L Stainless Steel Level Sensor HT19 Piezoresisti...
HT26V 10V Piezoresistive Silicon Pressure Sensor Diaphragm Sensor OEM HT26V Silicon Piezoresistive ...