|
[China]
Trade Verify
Address: Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China
Contact name:Merlin
Baoji Hengtong Electronics Co., LTD |
|
Verified Suppliers
|
|
|
BH93420 I Water level sensor
Introduction of liquid level transmitter :
BH93420-I level transmitter sensor liquid part using 316L stainless
steel corrugated diaphragm.Liquid level transmitter is the
extension and development of pressure transmitter technology,
according to the different gravity pressure produced by liquid at
different heights of a linear relationship, the principle of the
implementation of liquids such as water, oil, highly accurate
measurement and transmission.
Product Features of liquid level transmitter:
1. All stainless steel shell, suitable for all kinds of testing
environment.
2. Immersion probe measurement, convenient installation.
3. Choose a variety of output signal.
4. Explosion-proof marks: ExiaIICT6.
5. High protection grade :IP686. PE, PU or PTFE cable
Applications of liquid level transmitter:
1. Compatible with 316 LSS, no corrosive liquid or gas.
2. Monitor water level in various applications such as sewage, industrial and municipal water, tanks, Wells, rivers, sea water, lakes, etc.
3. The measurement of diesel and fuel level in the tank.
| Performance Parameters of liquid level transmitter | |
|---|---|
| Measurement Range | 0~10m…400m |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
| Overload | ≤ 2X rated range |
| Accuracy @ 25ºC | ±0.25% (Typ.) ±0.5% (Max.) |
| Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
| Long-Term Stability | ±0.2%F.S/year (Max.) |
| Zero Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Span Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
| Compensation Temperature | 0-50ºC (0-1m. 0-2m ); 0-70ºC |
| Operating Temperature | -20~80ºC |
| Storage Temperature | -30~100ºC |
| Vibration | 10g,55Hz ~ 2kHz |
| Housing Material | 1Cr18Ni9Ti |
| Diaphragm Material | 316L Stainless Steel |
| Insulation Resistance | >=100MΩ@100VDC |
| Explosion-proof Rating | ExiaIICT6 |
| Protection Rating | IP67, IP68 |
| O-Ring Seal | Fluoro rubber |
| Weight | ~0.3Kg (without cable) |
| Cable Material | Polyethylene, Polyurethane |
| Output Signal | Supply Voltage | Output Type |
| 4~20mA | 12~30VDC | 2/3/4 wire |
| 0~10/20mA | 3 wire | |
| 0/1~5V | ||
| 0/1~10V | ||
| 0.5~4.5V | 5VDC | |
| RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
| Ordering tips |
1. In the selection, please ensure that the tested medium is
compatible with the product parts in contact with it.
2. If the height of the liquid needs to be measured, please provide
the density of the measured medium. If not, the default liquid is
water and the density is 1.
3. For strong electromagnetic or radio frequency interference,
please provide us with detailed information and indicate in the
order.
4. To ensure the reliable operation of the product, it is recommended that the installation of lightning protection devices, and to ensure that products and power supply reliable grounding.
| Order Guide | ||||||||
| BH93420 | Code | Outline Construction | ||||||
| I | Pressure Transmitter | |||||||
| Measurement Range | 0~10m…400m | |||||||
| Code | Power Supply | |||||||
| D1 | 24VDC | |||||||
| D2 | 5VDC | |||||||
| D3 | Other | |||||||
| Code | Output Signal | |||||||
| S1 | 4~20mADC | S5 | 0~20mADC | |||||
| S2 | 1~5VDC | S6 | 0~10VDC | |||||
| S3 | 0~5VDC | S7 | 0.5~4.5VDC | |||||
| S4 | 0~10mADC | S8 | RS485 | |||||
| Code | Pressure Type | |||||||
| G | Gauge Pressure | |||||||
| A | Absolute Pressure | |||||||
| S | Sealed Reference Pressure | |||||||
| Code | Material | |||||||
| 01 | 304 Stainless Steel | |||||||
| 02 | 316L Stainless Steel | |||||||
| Code | Cable Material | |||||||
| C1 | PE | |||||||
| C2 | PU | |||||||
FAQ:
1. Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.
2. Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service.
3. Q: What is your production capacity?
A: Our production facilities can produce up to 30,000 pressure sensor
transmitters per month, so we are well positioned to meet large
orders.But, you are advised to contact our sales team in advance,
to ensure the smoothly.oduction and delivery scheduling.
4. Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized
products may vary.
5. Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners.
6. Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.
