|
[China]
Trade Verify
Address: Building 4, No.195, Gaoxin Avenue, Weibin District, Baoji City, Shaanxi Province, China
Contact name:Merlin
Baoji Hengtong Electronics Co., LTD |
|
Verified Suppliers
|
|
|
Introduction of BPZK01 Electronic Pressure Switch:
BPK-ZK01 digital pressure/differential pressure controller switch is an all digital measurement and control product that integrates pressure/differential pressure measurement, display, point control, and transmission output. It can be directly installed at the pressure measurement point on the site or mounted on the control panel of a test bench. It allows on-site setting of various parameters such as zero value, full scale value, and contact pressure value using the keypad.
Pressure controller switch are usually equipped with pressure sensors to measure the pressure in the system. The sensor converts the pressure into an electrical signal, which is passed to the controller for processing, and the output signal of the pressure controller can be an electrical or pneumatic signal, which is used to control the actuator (such as a solenoid valve or pump) to adjust the pressure in the system
Product Features:
Applications:
Measurement and control of pressure/differential pressure of fluid
media in industries such as hydropower, metallurgy, and chemical
engineering, for automatic control applications.
Performance Parameters:
| Measurement Range | -100kPa…0kPa ~ 10kPa…100MPa |
| 0-10KPa~2MPa(Differential Pressure) | |
| Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure,Differential Pressure |
| Overload | ≤ 1.5 times of the rated range |
| Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
| Long-Term Stability | ±0.3%F.S/year |
| Zero Point Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Full Scale Temperature Drift | ±0.03%F.S/ºC(≤100KPa) ±0.02%F.S/ºC(>100KPa) |
| Compensation Temperature | 0-50ºC(0-10KPa, 0-20KPa) ,0-70ºC ,-10-70ºC |
| Operating Temperature | -20ºC~80ºC |
| Storage Temperature | -40ºC~120ºC |
| Housing Material | 1Cr18Ni9Ti |
| Diaphragm Material | 316L |
| Insulation Resistance | 100MΩ 100VDC |
| Relay Control | 1-4 channels of control or electronic switch quantity control |
| Contact Life | Exceeds 100,000 cycles |
| Display Range | -1999~9999 |
| Installation Method | vertical axis installation |
| Explosion-proof Rating | Intrinsically Safe |
| Protection Rating | IP65 |
| Weight | ~0.5kg |
Outline Construction:
| Output Signal | Supply Voltage | Output Type |
| 4~20mA / 0-20mA | 24VDC or 220VAC | 3 wire |
| 1-5VDC /0-5VDC | 24VDC or 220VAC | 3 wire |
Ordering tips:
1. When selecting the product, please ensure that the measured
medium is compatible with the contacting parts of the product.
2. When placing an order, please specify the power supply, accuracy
grade, number of control points.
3. The measurement range of the flat diaphragm pressure controller
is 0~35KPa...20MPa.
4. For users selecting differential pressure measurement, pay
attention to the relationship between the differential pressure
range and the allowable overpressure and maximum pressure of the
high and low pressure chambers, and ensure it aligns with the
requirements of the field application. To ensure the safe and
reliable operation of the product, it is recommended to install a
three-valve manifold between the measuring point and the
transmitter.
5. To ensure the reliable operation of the product, it is
recommended to install lightning protection devices at the site and
ensure that the product and power supply are reliably grounded. For
special requirements such as strong vibration, instantaneous impact
force, strong electromagnetic interference, and radio frequency
interference, please inform our company and specify them in the
order.
Q&A:
