E-link China Technology Co.,LTD |
Verified Suppliers
|
|
10/100M PoE Injector IEEE802.3af 15.4W
Advantages
► Up to 15.4W of PoE Power
► Compliant with IEEE802.3af Standard
► Support 10/100Base-T
► Compliant with Limited Power Source (LPS)
► High Efficiency > 85%
► Low No Load Power Consumption < 0.5W
► Provide 2 LED indicators include Power LED(Green) and PoE LED(Orange)
► Over-Voltage/Load/Temperature & Short Circuit protections
► Plug & Play, no configuration required
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non-standard Ethernet Terminals
► Injects 48V DC through a CAT 5 cable, use all 2 pairs into remote
devices such as wireless AP, IP phone, web camera and other
functions
Technical Indexes
Ethernet | |
Standards: | IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX Fast Ethernet | |
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate: | 148,800pps (100Mbps) |
Cabling: | 10/100Base-T: Cat5 or above |
Maximum Distance: | IEEE802.3af PoE (15.4W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) |
Connector: | LAN: 1 x RJ-45 STP, “Data” Input Port |
Environmental | |
Operating Temperature: | -10°C to 50°C (14°F to 122°F) |
Storage Temperature: | -20°C to 70°C (-4°F to 158°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical | |
Input Voltage Range: | 100-240V AC @50/60Hz. |
Output Voltage: | DC 48V |
Power Consumption: | 15.4 watts max. |
PoE (Power over Ethernet) | |
Standard: | IEEE 802.3af |
Port: | RJ45 |
Pin Assignment | Data provide over pairs 1/2(+) and 3/6(-) |
PoE Power Output | DC 48V/15.4-watt PoE via 2-pairs |
LED Indicators | |
Power: | Power Status |
PoE: | PoE Status |
Dimensions (W×D×H): | 145 x 58 x 39mm |
Weight: | 0.25Kg |
Casing: | Plastic Case |
Mounting Options: | Desktop |
Regulatory Approvals | |
ISO9001 | |
FCC part 15, Class A | |
EN55022:2006+A1: 2007 Class A | |
Surge Protection: | |
RJ45: 1KV | |
Power: 500W | |
ESD: 4KV/8KV |
Overview
LNK-POE200 15.4W – 48V 10/100M PoE Injector is a long-distance
driving, fast network performing, strong PoE Output IEEE802.3af
certified midspan. It is a single port indoor PoE injector that can
provide up to 15.4W based on the IEEE 802.3af standard.
The midspans are ideal to power 802.11 access points, pan-tilt-zoom
(PTZ) and dome cameras, IP videophones, thin clients and other
power Ethernet end terminals with 15.4W of power. The solutions
support IEEE 802.3af powered devices and are also backward
compatible and safe to use with any IEEE 802.3af terminal. With
plug and-play installation, they are easy and cost effective to
implement leveraging existing Ethernet infrastructure while at the
same time providing the assurance of a future proof network.
Ordering Information
Model | Description |
LNK-POE200 | PoE Injector with Power Cord: 10/100Mbps, IEEE 802.3af 15.4W |