Solid Welded Wire Fence Roll , Reinforcing Welded Wire Fabric For Concrete 2.4 X 6 M

100 x 100mm 8mmx8mm R8 Concrete Reinforcing Mesh 2.4 x 6 m

Concrete Reinforcing Mesh is manufactured using cold-rolled deformed wire, electrically resistance welded at the intersections of the longitudinal and transverse wires at the required mesh spacing with minimal loss of strength and cross-sectional area. Which is made from 3–40 mm diameter metal rods. There are square or rectangular mesh openings for your choice, and with galvanized surface, it's corrosion and rust resistant, so it has long service life.

Golden Metal Supply:

1. Ribbed Steel Bar concrete wire mesh;

2. Round Steel Bar concrete wire mesh;

Strong welded point ensure flat even surface and firm structure,Welcome send inquiry!

Material:
1) Cold-rolled steel ribbed rebar
2) Cold-rolled steel round rebar
3) Hot-rolled steel ribbed rebar
Rebar dia: 6mm,8mm,10mm
Width: 2200mm, 2300mm, 2400mm
Length: 5800mm, 6000mm
Mesh Hole: 100mm x100mm,150mm x150mm,200mm x200mm
Application: used for the multi-storey,high commercial building,
airplane runway, road, tunnel.Bridge, concrete pipes, waterdyke,
dock, storage and sewage farm
 

Common used reinforcing wire mesh:

1).Concrete Reinforcing Mesh: Welded Ribbed Steel Rebar Fabric Reinforcement.also called concrete reo,reo mesh.

Welded mesh reinforcement is made from metal rods with 3 to 40 mm diameter. These metal rods are perpendicular bonded by spot welding. Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings.

Our reinforcing mesh wire is ribbed steel rod, which creates improves bonding to concrete, minimizes any concrete cracking that may occur as a result of concrete shrinkage.

Smooth steel reinforcing mesh also can be manufactured according customers special requirement.

Specification of concrete reinforcing mesh:

• Type: Concrete mesh heavy type (diameter of rods above 12 mm) and light type (diameter of rebar rods from 3 mm up to 10 mm).

• Material: stainless steel rebar rods, galvanized steel rods (with its excellent resistance to corrosion, galvanized reinforcing mesh can be successfully used in wet conditions).

• Mesh shape: rectangular or square.

• Distance between rods: 100, 200, 300, 400 and 500 mm.

• Mesh sheet width: 650 mm - 3800 mm.

• Mesh sheet length: 850 mm, 6 m, 9 m, 12 m.

• Standard reinforcing steel mesh sheet sizes are: 6.0 m × 2.4 m. And 4.80 m × 2.4 m, 3.6 m × 2 m, 2 m × 4 m also offered.

Specification:
Square Mesh AS/NZS 4671- Class L

Rectangular Mesh AS/NZS 4671 - Class L

1. High quanlity and reasonable price.
2. Customized on-demand.
3. Reasonable shipping and fast delivery.
Give me a chance, give you satisfied reply!