|
[China]
Trade Verify
Address: 4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Contact name:Sales
Shenzhen Olycom Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Specification of multi gigabit switch
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch(2F+6TP) |
| Port | 2 x 1000Mpbs SFP port, 1G/2.5G both supportive SM: 1310nm/1550nm,20Km; 1490nm/1550nm, 40~120Km; MM: 1310nm, 2Km; 850nm, 500 meters 6x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode: Storage and forward System bandwidth: 22Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
| LEDs | Power, network, fiber |
| Power supply | POE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 15.4W (port 1~8) (802.3at/bt standards required special instructions) |
| Environment | Working Temp: -40°～ 85°C; Storage Temp: -40°～ 85°C Working humidity: 10%～90%, non-condensing; Storage humidity: 10%～95%, non-condensing |
| Industry Standards | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control: NEMA-TS2; Vibration: IEC 60068-2-6; Freefall: IEC 60068-2-32; Shock: IEC 60068-2-27; Rail Traffic: EN 50121-4 |
| Safety | CE Mark, commercial; CE/LVD EN60950 |
| Mechanical information | Shell: Corrugated metal shell; Safety class: IP40; Dimension: 165 x 112 x 45.5mm; Mounting method: Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Management Software
This Vlan managed Ethernet switch adopts popular Vitesse chipset and got below managment features
Ring application of outdoor switch dual sfp
Actual Photos of sfp switch with poe din
FAQ
It is OK to monitor any 2 ports(fiber or Ethernet) via management.
management allows you to adjust the port combination.
Eg: one alarm setup is Ethernet 5 port and the other one is fiber 1 port.
Please note that, in this case if Ethernet 6 port is down, alarm port gives no response.
Simply put, combo ports are 2 sets of fiber/Ethernet ports that you could only use 1 set at the same time.
Let’s say you are connecting Ethernet 7 port to a router in your office, then FX 1 is automatically disabled.
Ethernet 7&FX 1
Ethernet 8&FX 2
When you use one port in each set(2 sets total), then the other port is automatically disabled.
And as you may notice, 8 ports(fiber&Ethernet) at most are working at the same time.
This flexibly allows you to do the combination in actual application.
It could be used as
