Active Member
|
[China]
Address: No. 15, Tianshun Industrial Park, Huaiyin District, Jinan, Shandong, China (Mainland)
Contact name:Zhu
Jinan Qihang CNC Equipment Co., Ltd. |
|
|
manual operate portable hydraulic punching machine for construction plant
Specifications:
CH-80 seprate-type hydraulic punching machine, used in angle iron, flat iron, Channel steel, I-steel, copper aluminum plate punching hole, specilized in electric power, construction, heavy work, ship, bridge and other industries, suitable for operation in outdoors.
1. The body of the machine is made of forged steel wire cutting with raw material. It is beautiful and durable and strong hard to broken.The bottom is designed with flat seat.
2. The punching speed is fast and the positioning is accurate. No
noise, no broken chip, safe operation of cleaning, no burr, no
deformation, conforms to the national standard of similar products
in the second to none.
3. CH-80 is suitable for outdoors operation or fixed in the
factory for mass production.
4. The pump use double hole oil road, oil return more quickly, can
prepare the solenoid valve foot switch, convenient, quick,
practical.
5. The weight is light. The die is made of Cr12 through heat
treatment. It is resistant to stamping and long life. It can
customize the mould of different specifications according to the
design requirements.
| Function | punching |
| type | CH-80 |
| Maximum pressure of punching | 50 tons |
| Maximum thickness of punching | copper, aluminum:20mm, steel plate:16mm |
| Mould parameter | Diamerer 6-25mm |
| Weight | 70KG |
| Oversize(cm) | 33*20*39 |
| Name | Electric pump |
| Maximum pressure | 70Mpa |
| minimum | 7 Mpa |
| power | 750W |
| rate | 50Hz/60HZ |
| Oil storage | 7L |
| High-Pressure flow | 0.9L/min |
| Low-Pressure flow | 5.0L/min |
| voltage | 220V |
| speed | 1400r/min |
| Oil type | Antiwear hydraulic oil |
| Oversize(cm) | 50*60*40 |
| weight | 30KG |
| Total weight | 100KG |
| Name | hydraulic punching machine |
| Punching scope | 6-25mm |
| Max.punching press | 50 ton |
| Max.punching thickness | 20mm |
| Standard punching dies | 10.5mm, 13.8mm, 17.5mm, 20.5mm |
| Remark | punching dies can produce as customer requirement |
Main characteristic:
The portable punching machine mainly processing iron, steel,
copper, aluminum, the maxiumu punching thickness is:20mm, the
punching diameter between 6mm and 25mm.Its is very suitable for
outdoors and household, CH-80 usually use together with
CWC-200 cutting machine and CB-200A bending machine.
The punching machine have hand operator and footer pedal two operation method, when you punching material just step on the footer pedal the machine will running, once stop step the footer pedal the machine will stop, it is very easy to operator.
CH-80 use 750W electric pump, the pump is 100% original, compare with others our machine with long service time, becuase the pump is good enough, the solenoid valve of the pump is high quality.
Before use the machine please add NO.20-NO32 hydraulic oil first.
