CBFI Commercial Ice Tube Machine Tube Ice Maker Germany Compressor

CBFI  Commercial Tube Ice Machine Used For Ice Factory In Africa
 

Brief Introduction about CBFI :
 
CBFI is the refrigeration equipment direct manufacture, leading the peer industry. We mainly produce tube ice machine,
cube ice machine, block ice machine, plate ice machine, flake ice machine, and all kinds of cold room.
 
In World Expo 2010,we are the supplier of edible ice.the first 3 tons edible ice machine is made by our factory in 2004.
we are specialized in ice machine and cold room over 15 years.

 
 
 
Quick Introduction about the CBFI Tube Ice Machine
 
Note: We have Tube ice machine of small, medium, large capacity, which ranges from 1T on to 40Tons .
All the specifications can be personalized according to your requirements.

 
,
 
 
Tube ice machine application
 
1 Edible ice for human consumption
2 Port ice plant ,ice factory
3 Coffee shop,bar,and hotel,etc
4 Supermarket,convenience shop and restaurant,etc
5 Aquatic products and food fresh preservation
6 Logistic fresh preservation
 

 
 
Tube ice:
It is a kind of hollow cylindrical ice with external diameter ø22,ø29,ø35mm and length 3~5cm.
The hole diameter is usually ø5~10mm and it can be adjusted according to ice making time.
Features: Tube ice is thick and transparent with long storage period. It isn't likely to melt in a short time.
 

 
 
Tube ice machine work conditions
 
Power supply:Full electric system complying with the general international standard
Ambient temperature:40°C
Water supply temperature:20°C
 
(water quality should be pure,Water filter and softening is suggested for places with hard water quality.
we also produce PU water filter.)
 
Tube ice specification:φ22,φ29,φ35,etc.(standard tube ice outer diameter,inner diameter 3~5cm )
Limit work conditions(variable work conditions):Ambient temp.:5°C~40°C; Water supply:0.5°C~30°C.
Refrigerant:R507,R404A etc.
 
 

Tube ice machine features
 
1 High reliability and low fault failure
 
——All the components of the tube ice maker system are world famous brand. Through decades of research and practice. CBFI products can run continuously without fault and keep good run and stable ice output even in ambient temperature ,5°C-40°C. Special designed machine can even allow normal run in the most atrocious conditions(-5°C—+56°C).
 
2 Scientific design and advanced processing technique
 
——CBFI tube ice maker has scientific design and can also make the best ice making system according to customer's
actual demand, with world leading ice making technology and processing and testing equipment. Each part is processed
with strict technique requirement and strictly tested before using.
 
3 Sanitary
——Quality and sanitary tube ice maker is the aim of CBFI. All parts contacting with water are made of stainless steel SUS304 or SUS316 material. Tube ice produced is sanitary without smell, we have got CE certificate since 2004.
 
4 Efficient and environment friendly
——With stable continuous running, CBFI tube ice maker realizes the running without energy wasting.use hot Freon gas to make ice fall off fast with the whole process takes only 150~180 seconds.After the ice is off, the water of low temperature is used for ice-making, saving energy consumption and increasing the volume of production of ice.With the unique water distributive pan and air mouth, the water can evenly flow on the tube wall of the evaporator spirally, so it improves the efficiency of heat transfer.Compared with other ice making equipment, CBFI tube ice maker boasts the advantages of compact structure, small area, low production cost, high refrigeration effect and low energy consumption, etc.
 
5 Module design and simple maintenance
 
——CBFI tube ice maker has module design for simple maintenance on site. Tube ice maker can be installed inside a standard container, very suitable for frequent moving occasion.
 



 
 

 
Professional and efficient after sale service level -from CBFI Strong and professional technical team all over the world. We are right here on your side!