Six-way weight acquisition feedback display crane wireless remote
control
The entire set includes 1 transmitter+1 receiver+1 analog input
collector, with a built-in receiver and an external extended
suction cup antenna.
Once the weight exceeds the set upper limit value, it can only
descend and cannot ascend. At this time, the remote control has a
self program judgment internally and automatically determines the
action control logic of only descending but not ascending.
Product model DHQ-6FD12KMR (ACDC12-24V/open space of 100 meters/1
generator, 1 receiver, 1 acquisition/16 switching values+1
emergency stop/bidirectional feedback analog input weight/limit
weight only decreasing logic judgment), other voltages such as
AC220V or AC380V are adapted through external transformer voltage
conversion
If the receiver directly outputs RS485, it is directly connected to
the overload limiter with RS485 interface, and there is no need to
lay out the collector separately. Other voltages such as AC220V or
AC380V are adapted through external transformers.
![](http://img.everychina.com/nimg/89/8d/f2046f9132ef9e25f9771a4dc178.jpg)
![](http://img.everychina.com/nimg/a1/34/87d88d3061b71653d2f9708648ef.jpg)
Product highlight: Good anti-interference performance, with unique identification
codes between each remote control transmitter and receiver,
reaching hundreds of millions of sets, never repeating, and
strictly avoiding mutual interference and potential interference.
And the remote control has up to 50-256 frequency points, and each
set in the same environment can be configured with separate
frequency points. Even if the frequency points overlap, given the
uniqueness of the ID identification code, there will be no impact
on each other, ensuring safety and reliability.
Usage: crane, overhead crane, crane, electric hoist, gantry crane,
cantilever crane, portal crane, port crane, wharf crane, ship
crane, bridge erecting machine, beam lifter, etc. within the
4-point switching value, as well as elevators, hoists, lifting
platforms, winch, motors, plate shears, sand screeners, concrete
pumps, electric flat cars, industrial furnace doors, winch winches,
etc.
Emitter
Frequency MHZ | 433 |
Transmitter RF power mW | Less than 10 |
Remote control distance M | 150/250 |
Power supply DC | DC4.5V |
Modulation | GFSK |
Frequency control | PLL |
Antenna impedance Ω | 50 |
Command response time ms | Less than 40 |
Working temperature ℃ | -35℃~75℃ |
Protection grade | IP65 |
Receiver
Frequency MHZ | 433 |
Receiving sensitivity dBM | -112 |
Remote control distance M | 150/250 |
Power supply DC | DC12-24V |
Modulation | GFSK |
Frequency control | PLL |
Antenna impedance Ω | 50 |
Command response time ms | Less than 40 |
Working temperature ℃ | -35℃~75℃ |
Antenna mode | External suction cup type |