46 point switch value+4 analog variable speed control industrial
wireless remote control DH-Z4M8F12B10X3X3X3:
Main function: 4 speed control knobs, each corresponding to 0-10V
output; Four three position self resetting torsion switches, each
corresponding to one mechanism with two forward and reverse switch
values for self resetting action; Four three position self-locking
twist switches, each corresponding to one mechanism with two
forward and reverse switching values that self maintain action;
Four two position self-locking twist switches, each corresponding
to the start/stop of one device, with one switch value maintaining
action; One ABC three selector rotary switch corresponds to three
switch actions, which can be used to select different states or
devices. One 123 three selection position rotary switch can select
the action of equipment 1, 2, and 3, corresponding to the output of
three normally open point relays at the receiver end; One 1/2/1+2
rotary switch with a total of three selection bit bands, which can
select any one or two devices from two devices to perform actions
together, corresponding to two normally open relay outputs at the
receiver end; 1 ten position band selection switch, which can
select 10 different states or action forms or device numbers,
corresponding to 10 normally open relay outputs at the receiver
end; 8 action execution buttons, all in jog mode, with up and down
interlocking, east-west interlocking, north-south interlocking, 1
and 2 interlocking. Each button corresponds to one normally open
relay output at the receiver end; The start knob and emergency stop
knob are used to start the transmitter's local power supply and
connect the corresponding receiver's main output control circuit.
At this time, the controlled end equipment is powered on, and the
emergency stop can be snapped to instantly cut off the main output
control circuit and all other executing actions. LCD screen,
regular display of battery level, signal strength, and operation
button prompts.
Product highlight: Good anti-interference performance, with unique
identification codes between each remote control transmitter and
receiver, reaching hundreds of millions of sets, never repeating,
and strictly avoiding mutual interference and potential
interference. And the remote control has up to 50-256 frequency
points, and each set in the same environment can be configured with
separate frequency points. Even if the frequency points overlap,
given the uniqueness of the ID identification code, there will be
no impact on each other, ensuring safety and reliability.
Usage: Equipment within the 46 point switch value+4 analog variable
speed control function, such as bridge erecting machines, beam
lifting machines, port cranes, tower cranes, traveling cranes,
overhead cranes, conventional cranes, three hoist traveling cranes,
three small vehicle traveling cranes, gantry cranes, gantry cranes,
and gantry cranes, as well as chain hoists, special vehicles,
tunnel trolleys, hydraulic machinery, excavation machine pump
stations, mobile crushers, special vehicles, rolling machines, and
multi motor equipment Shearing machines, construction machinery,
construction vehicles, mining machinery, etc.
Technical parameters: remote control distance of 100 meters, 250
meters, working temperature of -35 ° -+75 °, transmitter power
supply of 3 No. 5 dry batteries of 4.5V, receiver standard working
voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc.,
can be adjusted through external transformer voltage adjustment,
and external transformer voltage adjustment can be added.
Model and configuration instructions: This machine model
DH-Z4M8F12B10X3X3 comes standard with 1 transmitter and 1 receiver.
The transmitter antenna is built-in, and the receiver is equipped
with an external extended suction cup antenna (1 meter long
feeder), which is attached to the outside of the distribution box
and installed inside the receiver.